Sharp DV-RW370X operation manual Satellite Link cont’d, Settings for external equipment

Recording

Satellite Link (cont’d)

Note

•If you have not set the clock, the clock setting window will appear at step 3. Follow to step 4 in “Clock Setting” on page 22.

•You cannot set the End time for the Satellite Link Timer Recording on this unit.

•Recording picture will be distorted if the copy protection signal is being detected during Satellite Link Timer Recording.

•When a regular Timer Recording and the Satellite Link Timer Recording are overlapped, those recordings are recorded as illustrated below.

	Example 1		Example 2		Example 3
Timer		Timer		Timer
Recording		Recording		Recording
Satellite Link		Satellite Link		Satellite Link
Actual		Actual		Actual
Recording		Recording		Recording

Settings for external equipment

Recording from external equipment

Before you start Connections Getting started

Before recording from external equipment, see page 15 for connection instructions.

1

Press [ OPERATE] to turn on the unit.

Turn on the TV and be sure to select the input to which the unit is connected.

2

When you want to record to a tape:

Pressfirst.

Insert the tape with a record tab into the cassette compart- ment.

When you want to record to the disc:

Pressfirst.

Press [OPEN/CLOSE EJECT A] to open the disc tray, then place the disc to record on.

Press [OPEN/CLOSE EJECT A] again to close the disc tray.

3

Select the external input mode to which the external equip- ment is connected. (AV1, AV2, AV3 or AV4)

To use the Scart terminal or input jacks on the rear of this unit;

To select the “AV1”, or “AV2”, press [0], [0], [1] or [0], [0], [2] accordingly or use [PROG. / ].

To use the input jacks on the front of this unit;

To select “AV3”, press [0], [0], [3] or use [PROG. / ].

To select “AV4”, use [PROG./].

4

Select a recording mode using [REC MODE]. (See page 24.)

5

Press [REC/OTR] (VCR or DVD) on the unit to start recording.

6

Press the PLAY button on the external recording component.

7

For tape:

Press [STOP C/EJECT A] on the unit to stop recording.

For disc:

Press [STOP C] on the unit to stop recording.

1	OPERATE	DUBBING	SETUP	OPEN/CLOSE	2
				EJECT
	T-SET	TIMER PROG. REC MODE		RAPID PLAY
	ZOOM	VCR	DVD	CM SKIP
	TOP MENU			MENU LIST	4
	RETURN			ENTER
	.@/:	ABC	DEF
3	1	2	3	PROG.
	GHI	JKL	MNO
	4	5	6
	PQRS	TUV	WXYZ
	7	8	9	SKIP
	CLEAR/C-RESET SPACE		DISPLAY
		0
	REV			FWD
		PLAY
	VCR			DVD
	REC/OTR			REC/OTR
		STOP
	REPEAT	AUDIO	SEARCH	SLOW
				PAUSE

VCR/DVD RECORDER

COMBINATION

NB203ED

Note

•During recording, if a signal other than PAL is detected (such as NTSC), recording is paused.

•If you want to monitor the programme that you are recording, make sure the device such as Satellite Box is turned off when it is connected to AV2.

Changing the Recording Disc Playback Editing Setup menu VCR functions Others

EN 35