Sharp DV-RW370X operation manual Vcr, Process is cancelled, the disc MAY not work

			Others
			Troubleshooting (cont’d)
	Symptom		Remedy
			DVD
Some functions such as Stop,			• Depending on the disc, you may not be able to perform some of those
Search, or Slow-motion Playback			operations. See the instruction manual supplied with the disc.
cannot be performed.
The language for the sound track			• Multilingual tracks are not recorded on the DVD-Video, DVD-RW or DVD-R
cannot be changed.			being played back.
			• The DVD-Video prohibits the changing of the language for the sound track.
			• Try changing the language using the DVD-Video menu.
The subtitle language cannot be			• Multilingual subtitles are not recorded on the DVD-Video.
changed or turned off.			• The DVD-Video prohibits changing the subtitles.
			• Try changing the subtitles using the DVD-Video menu.
Angles cannot be changed.			• You can change the angle only if the disc contains multi-angle scene. Angles
			can be changed only when the multi-angle scene appears on the screen.
			• The DVD-Video prohibits changing angles.
			• Try changing the angle using the DVD-Video menu.
Recording does not start			• An unused DVD-RW or DVD-R was inserted. It takes a while for the unit to
immediately after pressing			automatically format a DVD-RW.
[DVD REC/OTR I].
Recording does not stop			• It will take a few seconds for the unit to send data to disc before recording
immediately after you press			can stop.
[STOP C].
The disc tray does not open when			• It may take a few seconds for the disc tray to open after you have recorded or
you press			edited a disc.
[OPEN/CLOSE EJECT A].			• This is because the unit is sending data to the disc.
“Repairing” appears on the display.			• If a power failure occurs or the mains cable is unplugged during recording,
			finalising, formatting or editing (even after “Wait for a moment.” message
			disappeared), a repairing process will begin automatically when the unit is
	Repairing
			turned on next time. It may take several minutes up to about four hours.
In a case you intend to cancel the			• If you intend to cancel the Repairing process, press [OPEN/CLOSE EJECT A]
Repairing process.			on the front panel, then select “Yes” with [Cursor s / B] and press [ENTER].
			After that, the disc tray will automatically open. In case the Repairing
	Do you want to cancel a repairing process ?
			process is cancelled, the disc MAY NOT work.
	When selecting “Yes”, the disc may not be
	usable.
	Yes
		No
	Repairing

Before you start Connections Getting started Recording Disc Playback Editing

	VCR
Picture noise appears.	• Adjust tracking control for better picture by pressing [PROG. / ] while
	you are playing back a video tape.

•Head cleaning for VCR may be necessary. Refer to “AUTO HEAD CLEANING” on page 4.

The unit does not play back the	• No video tape is inserted.
tape.
Recording does not start	• Make sure the video tape has a record tab when you record to a video tape. If
immediately after pressing	needed, cover the hole with cellophane tape.
[VCR REC/OTR I].
The remote control does not	• Check if a video tape is in the unit. Press [VCR]. Then, try again.
function.	• Check if the Child Lock is activated. (See page 10.)
The motor rotates even when	• The motor may rotate for the duration of approximately 5 minutes for
playback / recording is stopped.	efficient operation. This is not a malfunction.

* If the above remedies do not solve the problem, please call an authorised service centre.

Changing the Setup menu VCR functions Others

EN 93