Sharp DV-RW370X operation manual Hints for Timer Recording, Priority of overlapped settings

Page 33

Recording

Timer Recording (cont’d)

Hints for Timer Recording

Before you

•If there is a power failure or the unit is unplugged for more than 1 hour, the clock setting and all timer settings will be lost.

•If there is no disc or an unrecordable disc in the tray, the

icon will flash and the timer recording will not occur. Insert a recordable disc.

•If there is no tape or a tape with a record tab is not in the cassette compartment, the VCR indicator on the front panel flashes and the timer recording cannot be performed. Please insert a recordable tape.

•When all timer recordings are complete, the icon flashes. To play back or eject the recorded disc, press [T-SET], and then press [PLAY B] or [OPEN/CLOSE EJECT A].

•The timer recording cannot be performed in DVD and VCR at the same time. If you set two programmings with the same channel and time both in DVD and VCR, the programming that has priority will be recorded.

•You cannot make any DVD operation during DVD timer recording.

•You cannot make any VCR operation during VCR timer recording.

•If the Start and End times are same, the length of the recording will be set for 24 hours. If the disc or tape becomes full during recording, the unit will turn itself off. To continue recording, press [T-SET]to cancel the timer-standby mode, insert a recordable disc or tape and press [T-SET]again.

•If two or more programmes overlap, “Overlap” and the overlapped programme number will appear on the display.

•If the Start time is earlier and the End time is later than the current time, the recording will start immediately after you press [T-SET].

•If a videotape ends during the timer recording, the unit will automatically stop, eject the videotape, and turn itself off. To continue recording, insert a recordable tape.

start Connections Getting started

Priority of overlapped settings

The unit records programmes according to prior ity if the timer programmes overlap.

Recording

If the starting time is same:

•The timer programming set first (PROG. 1) has priority.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 1

PROG. 2

recording

 

 

Additional 30 seconds (at the most) are cut off.

If the recording time is partially overlapped:

•The timer programming with the earlier start time (PROG. 2) has priority. PROG. 1 will start after PROG. 2 recording is completed.

PROG. 1

 

 

PROG. 2

 

 

Actual

PROG. 2

PROG. 1

recording

Additional 30 seconds (at the most) are cut off.

Disc Playback

PROG. 2 recording will start after PROG. 1 recording is completed.

If programming has been made at the end of the programming (PROG. 1) currently being recorded:

•The timer programming set first (PROG. 2) has priority. PROG. 3 will not be recorded.

PROG. 1

 

 

PROG. 2

 

 

PROG. 3

 

 

Actual

PROG. 1

PROG. 2

recording

Additional 30 seconds (at the most) are cut off.

PROG. 2 recording will start after PROG. 1 recording is completed.

Note for DVD recording

If the recording time entirely overlaps:

•The shorter timer programming (PROG. 1) is not recorded.

PROG. 1

 

PROG. 2

 

Actual

PROG. 2

recording

 

Changing the Editing Setup menu VCR functions

•If the recording time of two programmes overlap, or the End time of a programme and the Start time of another is same, the first 30 seconds (at the most) of the subsequent programme are cut off.

If the End time of the programme currently being recorded and the Start time of the subsequent pro- gramme are same:

•If PROG. 1 is a DVD recorded programme, the beginning of PROG. 2 may be cut off.

*If the cut off time exceeds 1 minute, the error number “E40” will appear in the Timer Programming list.

PROG. 1

PROG. 2

Actual recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. 1

 

 

PROG. 2

 

 

 

 

The first 30 seconds (at the most) are cut off.*

Others

EN 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents This unit is Region number forPower Cord Protection PrecautionsSupplied Accessory Nonuse PeriodsLocation and Handling Precautions cont’dCopyright Copy ProtectionCleaning Discs Cleaning the CabinetAuto Head Cleaning ServicingTable of contents Symbol Description FeaturesPlayback Compatibility8* 9*10 13 14 16 17*18 19 20 Functional overviewRemote Control Functional overview cont’dRear Panel VCR mode CLEAR/C-RESET button VCR / DVD DVD modeREV E / r button VCR / DVD DVD mode Audio button VCR / DVD DVD modeInstalling batteries in the remote control About the remote controlChild Lock function VCR Mode VCR/DVD recorder SwitchingDVD Mode Guide to On-Screen DisplaysRequired Setting Setup menusPlayback DisplayFront Panel Display Guide Display messageVCR functions Others Basic TV connection Connecting to a TV14 EN VCR and Basic DVD ConnectionConnecting to external equipment Connecting to a TV cont’dEditing Setup menu AV3 Front16 EN Connecting to an Audio SystemEasy DVD recording Turn on the unit Select the DVD mode Open the disc trayThis unit can record on the following type of discs Ing, select the rewritable DVD-RW type discEasy DVD recording cont’d Mode ChannelAuto Tuning Channel settingManual Tuning Channel setting cont’dSelect Manual Tuning using Cursor K / L, then press Enter After completion, press Setup to exitTo skip a Preset channel To select a channelMove Clock Setting Setting the clockSelect Clock Setting using Cursor K / L, then press Enter Default date will appearEnter Information on DVD recording Recording modeType of discs Recordable discsInformation on copy control Information on DVD recording cont’dMaking discs playable in other DVD players Finalise Usable discsFormatting a disc Select Format Mode using Cursor K / L, then press EnterChoosing the recording format of a brand-new DVD-RW disc Formatting is completedFormatting a disc cont’d Setting Auto ChapterRecording Audio Select XP PCMIf you want to cancel formatting, select No Insert a recordable disc Stop mode, press SetupReformatting a disc manually Popup window will appear and prompt you to confirmSetting Bilingual Recording Audio Setting External Input AudioBasic recording / One-touch Timer Recording OTR Timer Recording Timer Recording cont’d To stop the timer recording in progressIf the timer programming did not complete correctly Priority of overlapped settings Hints for Timer RecordingIf the starting time is same If the recording time is partially overlappedSatellite Link Select Satellite Link using Cursor K / L, then press EnterPreparation on this unit Press EnterSettings for external equipment Satellite Link cont’dRecording from external equipment Guide to DV and On-Screen Display DV dubbingDV dubbing cont’d Select Dubbing Mode using Cursor K / L, then press Enter Dubbing ModeRecording menu will appear Option window will appearSelect DVD VCR using Cursor K / L, then press Enter Select VCR DVD using Cursor K / L, then press EnterPress Dubbing Press Stop C to stop the recordingSelect Finalise using Cursor K / L, then press Enter To cancel the disc protectFinalising discs 40 ENAuto finalise FinalisingXXXXdiscscont’dcont’dYou start Connections Getting started RecordingPlayable discs Information on playing back DVDsColour systems Region codesHint for DVD playback Playing back a DVD-RW / DVD-R / DVD+RW / DVD+R discPress Stop C to stop play- back Basic playback cont’d Playing back a DVD-Video / CD / Video CDPlaying back an MP3 / Jpeg Playing back a DivX DivX Official DivX Certified product HintSelect an item using Cursor Playing back discs using the Disc menuPress Menu List B, then press Disc menuPlaying back a disc using the Title menu Playing back a Video CD using the Title menuPBC function for Video CDs PBC function for Video CDs cont’d Cancelling and Recalling the PBC functionSpecial playback Resume playbackFast forward / Fast reverse Special playback cont’dSkipping TV commercials during playback CM SkipRapid Play PauseDuring playback, press Pause F Press Play B to resume play- backSlow forward / Slow reverse playback Step by step playback52 EN PauseSelect the icon using Cursor / B, then press Enter Marker SetupZoom During playback, press DisplayTitle / Chapter search SearchTrack search DisplaySearch cont’d Direct SearchTime search Repeat playback Repeat/Random/Programme playback / Slide ShowSelect Random Play using Cursor K / L, then press Enter CD Playback Mode menu will appear Audio CDRepeat/Random/Programme playback / Slide Show cont’d Random playbackSlide Show Programme playbackSelect DivX VOD using Switching subtitlesSelect Playback using Cursor DivX VODSwitching audio soundtrack Switching virtual surround systemSelecting the format of audio and video cont’d Icon using Switching camera anglesReducing block noise Select Cursor / B, then pressInformation on disc editing Original and Playlist VR modeGuide to a title list Edit the recorded discEditing discs Information on disc editing cont’dDVD-RW DVD-REditing discs Select Title Delete using Cursor K / L, then press EnterDeleting titles Press Return or Stop C to exitEditing discs cont’d Select Edit Title Name using Cursor K / L, then press EnterEditing title names Press Return and then Return or Stop C to exitAbc 123 Guide to edit title nameAdding or deleting chapter marks Select Chapter Mark using Cursor K / L, then press EnterConfirmation window will appear. e.g. Add DeleteChapter mark is added Adding a chapter markDeleting a chapter mark Chapter mark is deletedPicture is set as the thumbnail Setting pictures for thumbnailsDeleting a part of a title Select Scene Delete using Cursor K / L, then press EnterSelect Delete using Cursor K / L, then press Enter Part of the title is deletedOr Playlist is more than You can divide a title into two new titles Press first Dividing a titleCombining titles Select Title Combining using Cursor K / L, then press EnterYou can combine two titles into a single title Press first If either one of the twoFollow the on page 64 to display the Playlist Adding titles to a PlaylistErasing all Playlist Select Yes using Cursor s / B, then press EnterPlaylist is deleted Deleting a Playlist will Not increase the availableSelect Protect using Cursor K / L, then press Enter Setting or releasing the title protectionTo protect a whole disc DVD-RW VR mode Only Confirm the indication OFF ON. Press Enter againChapter marks are added Setting or clearing all chapter marks in one titleYou cannot select a chapter Mark interval that exceeds78 EN Tour of the Setup menuSelect a setting using Cursor Language settingAudio Default Original Subtitle Default OFFLanguage setting cont’d Display settingAngle Icon Default on Audio setting Display setting cont’dScreen Saver Default 10 minutes FL Dimmer Default BrightSelect a setting using Cursor K / L, then press Enter Audio setting cont’dDynamic Range Control Default on Video settingTV System Default PAL Set the TV system Video setting cont’dVideo Out Default Scartrgb Select Yes using CursorDVD-Videos Parental Lock level Select Parental Lock using Cursor K / L, then press EnterProceed with either of the following steps AllChange the password Your setting is activated If you select No, proceed to stepDVD-Videos Parental Lock level cont’d YesPlayback One-touch Timer Recording Recording and One-touch Timer Recording OTR cont’dSelect the recording mode using REC MODE. See Turn on the unit and insert a recordable tapeIndex search Mode Audio output Display on Selecting the Sound ModeOther operations Hi-Fi Stereo Sound SystemTroubleshooting VCR / DVDSET 92 EN DVDVCR Process is cancelled, the disc MAY not workError message Cause Solution Troubleshooting cont’dLanguage Code Language codeCprm GlossaryDTS JpegVideo recording format SpecificationsAudio recording format Receivable channelsPage 1300 135 1VMN23152 Congratulations on Your Purchase
Top Page Image Contents