QUICK REFERENCE |
| Preparation |
Installing Batteries in the Remote Control Unit
If the remote control fails to operate TV functions, replace the batteries in the remote control unit.
1Open the battery cover.
Using the Remote Control Unit
Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a
Connecting Antenna Cable
•Connect the antenna cable to the TV using one of the methods in the illustration as shown (1, 2, 3 or 4).
2Insert two "AAA" size batteries (supplied with the product).
•Place the batteries with their terminals corresponding to the (e) and (f) indications in the battery compartment.
3Close the battery cover.
Remote control sensor
30°
17´ (5 m)
30°
30°
30° *
* The angle is 6º when the stand is attached.
■Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, and do not place it in an area with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on the TV is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or the TV, or operate the remote control unit closer to the remote control sensor.
1 Cable without a CATV converter
2 VHF/UHF antenna
3 Combination VHF/ UHF antenna
4 Separate VHF/UHF antenna
| Home Antenna |
Cable TV | terminal |
| Coaxial cable |
Home Antenna
Coaxial cable
|
| o | r |
|
|
|
|
| |||||||||||
|
| cable (flat) |
|
|
|
|
|
|
| adapter |
|
| |||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| UHF |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
| ANTENNA |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
VHF |
|
|
|
|
|
|
|
|
|
|
|
| |||||||
ANTENNA |
|
|
|
|
|
|
|
|
|
|
|
| |||||||
|
|
|
|
|
|
|
|
|
|
| IN |
|
| OUT |
|
| To TV antenna | ||
|
|
|
| Combiner | |||||||||||||||
|
|
|
| terminal | |||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| ||
|
| or |
|
|
|
|
|
|
|
|
|
|
|
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•Do not mix batteries of different types. Different types of batteries have different characteristics.
•Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage in old batteries.
•Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a rash. If you fi nd any chemical leakage, wipe thoroughly with a cloth.
•The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•If you will not be using the remote control unit for an extended period of time, remove batteries from it.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT
1. A | ||
that can easily be attached to a terminal without tools. | ||
2. A | ||
| ||
to a |
| |
NOTICE | ||
| ||
When connecting the RF cable to the TV set, do not tighten | ||
| ||
If tools are used, it may cause damage to your TV set. (The |
| |
breaking of internal circuit, etc.) |
10