QUICK REFERENCE
Attaching the Stand
•Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
CAUTION
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
NOTE
• Refer to pages 7 and 9 for the instructions on the installation of the 80 inch models.
■
1Confirm that there are 12 screws (6 long screws, 4 middle screws and 2 short screws) supplied with the stand unit.
21 Set the post for the stand unit onto the polystyrene foam.
2 Attach the base to the post.
3 Insert and tighten the 6 screws into the 6 holes on the bottom of the base.
•Hold the stand unit securely with one hand, and then tighten the screws.
51 Insert the stand cover.
2 Insert the 2 screws to secure the stand cover.
Short screws
2
1 
1 
■LC-70LE857U/LC-60LE857U
1Confi rm that there are 9 screws (4 long screws, 4 middle screws and 1 short screw) supplied with the stand unit.
2Attach the supporting post for the stand unit onto the base as shown below.
•The supporting post attaches to the base at an offcentered location on the base. Be sure to attach the supporting post in the direction indicated below and attach the stand to the TV with the wider side of the base facing forward.
Long screws
3Insert the stand into the openings on the rear of
the TV.
• Make | stand is fi rmly inserted into the TV. |
| may result in tilting of the TV set. |
Soft
4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.
Middle screws
51 Insert the stand cover.
2 Insert the screw to secure the stand cover.
Short screw
Long screws
3
2
1 1 
FRONT
3Insert the stand into the openings on the rear of
the TV.
• Make | that the stand is fi rmly inserted into the |
TV. | may result in tilting of the |
TV |
|
Soft cushion |
|
4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.
Middle screws
6