Sharp LC70LE655U operation manual Configuring the TV Settings to Enhance 3D Image Viewing

Page 36

Enjoying 3D Image Viewing (for the LE857U, LE757U, LE755U, LE657U and LE655U models)

Watching 2D Images in 3D

You can convert normal 2D images into 3D images.

1Press 3D.

2Press c/d to select "2D3D", and then press

ENTER.

3Turn on the 3D Glasses and place them on your head.

NOTE

• The TV returns to 2D mode after 1 hour has passed.

Switching to the Previous Mode

You can switch back to the previous mode by pressing 3D.

1Press 3D.

A confi rmation screen is displayed.

2Select "Yes" and then press ENTER.

The TV returns to the previous mode.

3D Menu

Pressing 3D in 3D mode displays the 3D menu. Press the colored buttons to make the necessary settings.

A:3D Brightness Boost

(for the LE857U, LE757U and LE755U models)

B:3D Surround (See page 25.)

The surround mode changes each time you press B.

C:2D3D Convert Effect

D:3D Setup

Configuring the TV Settings to Enhance 3D Image Viewing

You can adjust the 3D image to the desired image quality and make various settings for 3D image viewing.

Set AV MODE and "3D Brightness Boost" with "Picture Settings".

Set the 3D viewing settings with "System Options" > "3D Setup".

NOTE

Which items can be selected/adjusted differs depending on whether the TV is in 2D mode or in 3D mode.

AV MODE

The audio and video settings can be changed to suit the program or input content being watched.

STANDARD(3D): For a highly defi ned image in a normal lighting.

MOVIE(3D): For a movie.

GAME(3D): Lowers image brightness for easier viewing.

NOTE

You can select AV MODE by pressing AV MODE on the remote control unit.

3D Brightness Boost

(for the LE857U, LE757U and LE755U models)

You can adjust the backlight of the TV for 3D image viewing.

High/Middle/Low: Select a desired level of 3D Brightness Boost.

NOTE

When "High" or "Low" is selected, "OPC", "Backlight" and "Range of OPC" are not available.

3D Setup

You can make various settings to enhance 3D image viewing.

3D Auto Change

This setting can be used to switch to 3D mode automatically when a 3D identifi cation signal is detected.

Set the desired mode according to the type of media you are viewing, such as video from a connected device or video from an internet application.

Mode 1: 3D mode is selected automatically when a 3D signal is detected while viewing video from a VOD service or HDMI-connected equipment.

Mode 2: 3D mode is selected automatically when, in addition to detecting a 3D signal while viewing video from a VOD service or HDMI-connected equipment, a video pattern with "Side by Side" or "Top and Bottom" format is also detected.

Off: Auto change is not performed.

NOTE

This function does not work when the input source is Composite, Component, RGB or Analog/Digital tuner.

3D Depth Control

Select the method for adjusting the 3D depth.

Auto: The depth is adjusted automatically.

Manual: You can manually adjust the depth using the function "Depth Change".

NOTE

This function is only available when the input signal is 3D.

This function may not be displayed depending on the type of 3D signal.

Depth Change

Adjusts the depth manually. "0" is the level where no adjustment is made.

NOTE

This function is only available when "3D Depth Control" is "Manual".

2D3D Convert Effect

You can adjust the 3D effect when converting images from 2D mode to 3D mode.

Select a desired level of convert effect from +1 to +16.

NOTE

This function is only available when converting 2D images to 3D images.

When you use this function, image conversion on the TV will result in some differences in the original images and how they appear.

2D images that have been converted to 3D images may be viewed only for personal use.

Viewing Time Info

This displays the elapsed time of 3D image viewing.

Yes: Displays the elapsed viewing time on the screen every hour.

No: Does not display the elapsed viewing time.

3D Test

This displays 3D images for testing the 3D operation. Clicking "Start" on the screen plays back 3D test images.

If you press RETURN during playback, the previous screen will be displayed.

3D Glasses Control

To enable this function, set "TV Location" to "Store".

On: Switch on signals to the 3D glasses. When watching 3D images, switch this setting to "On".

Off: Switch off signals to the 3D glasses. This will stop the TV from infl uencing 3D glasses that may be in that area of the store.

34

Image 36
Contents Veuillez lire ce mode d’emploi avant de Televisor CON Pantalla DE Cristal LíquidoPage Wireless Radio InformationFCC Compliance Statement Industry Canada StatementAdditional Safety Information Dear Sharp CustomerTune in to Safety Consumer Electronics Industry CaresWall or Ceiling Mount Your Television Moving AN Older Television to a NEW Place in Your HomeAccessories Supplied AccessoriesOptional Accessories Contents Attaching the Stand LC-70LE857U/LC-60LE857UInsert the stand into the openings on the rear Make Attaching the Stand for the 90/80 Inch Models Building the Work TableLC-70LE657U/LC-70LE655U/LC-70LE650U/ LC-70C6500U LC-90LE657ULC-80LE757U LC-80LE857UExperiencing HD Images LC-90LE657U/LC-80LE657U/LC-80LE650U/ LC-80C6500ULC-80LE657U/LC-80LE650U/LC-80C6500U Installing Batteries in the Remote Control Unit Using the Remote Control UnitPreparation AntennasPart Names TV FrontTV Side TV RearRemote Control Unit Part Names13 LE857U, LE757U, LE755U, LE657U and LE655U models Introduction to Connections Types of ConnectionDisplaying an External Equipment Image Connecting to External Equipment When using an Hdmi cable Hdmi in 1, 2, 3 orWhen using a DVI-HDMI conversion cable Hdmi When using a Component cable ComponentConnecting to External Equipment Connecting a Surround System/Audio SystemConnecting a PC Turning On/Off the Power Initial InstallationWatching TV Watching TV EnterChanging Volume Direct Button OperationChanging Channels SmartCentralSleep Timer Direct Button OperationPress View Mode ExamplesDot by Dot Full Screen 720pFor PC Example Screen size images Normal Zoom Stretch Dot by DotStretch Dot by Dot On-Screen Display Menu On-Screen Display Menu OperationMenu Operation Buttons On-Screen Display Menu Menu ItemsPicture Settings AV Mode Changing Pic.QualityOPC Setting Advanced Picture SettingsAudio Settings Auto VolumeSurround For the LE650U, C7500U and C6500U models Bass EnhancerPower Control System OptionsIcon Light Up Setting Quick Start ModeWallpaper Setting Menu DesignInitial Setup Wall Mount Audio Setup ResetIndividual Setup LanguageSoftware Update InformationIdentification Digital Caption Info Manual Update Updating the Software with a USB Memory DeviceUpdating the Software via the Network Switching from 3D to 2D Mode Display Methods for 3D and 2D ImagesViewing 3D Images Ending 3D Image ViewingConfiguring the TV Settings to Enhance 3D Image Viewing Connecting a USB Memory Device/USB Hard Drive 3D Glasses lensesUsage range of the 3D Glasses Connecting a Home Network Dlna Server Enjoying Photo/Music/Video PlaybackSelecting the Folders to Play Back USB Device CompatibilityPhoto Mode Viewing ThumbnailsViewing Individual Photos Slide ShowMusic Mode Video ModeDivX Setup Set Up Home NetworkPlaying Back Files from a Portable Device or PC USB Operation Panel/Home Network Dlna Operation PanelPresetting Remote Control Function Other Viewing OptionsUsing Aquos Link Controlling Hdmi Equipment Using Aquos LinkOther Viewing Options Operating the Connected EquipmentUsing Aquos Link Link Operation MenuUsing a Smartphone with the TV Using a PC Adjusting the PC ImageSetting Audio Input Control of the TVUsing a PC PC Compatibility ChartCommand table Resolution HorizontalUsing the Internet Connecting to the InternetInternet Setup Network SetupUsing the Internet Interactive ServiceAquos Advantage Live Entering Text Software KeyboardUsing the Browser Using the ToolbarBrowsing Web Contents Using Keyboard and Mouse Using Applications via the InternetExamples of Application Logos Appendix Setting the TV on the Wall AppendixWall Mount Kit Specifications WallWall Mount KIT Troubleshooting Troubleshooting Error Message Information on the Software License for This ProductSoftware License Clearing the Secret NumberSpecifications E32F to e104F 0C to e40CSpecifications Model LC-60LE657UWireless LAN BluetoothSpecification Notas sobre la Certificación de Radiodifusión en MéxicoTrademarks MhltmCalling for Service BE-SHARPDimensional Drawings LC-80LE857ULC-70LE857U LC-60LE857ULC-80LE757U LC-70LE757U/LC-70LE755U/LC-70C7500U LC-60LE757U/LC-60LE755U/LC-60C7500UUnit inch mm Unité pouce mm LC-90LE657U LC-70LE657U/LC-70LE655U/LC-70LE650U/LC-70C6500UAN-52AG4 LC-60LE657U/LC-60LE655U/LC-60LE650U/LC-60C6500U LC-80LE657U/LC-80LE650U/LC-80C6500USharp Electronics Corporation