On-Screen Display Menu
Boot Picture
With this function activated, the SHARP logo will be displayed when you turn on the TV.
NOTE
•This function is not available when the TV is set to "Quick Start Mode".
Response Tone
(For the LE857U, LE757U, LE755U and C7500U models)
With this item set to "On", the TV will give off operation sound when you use the SmartCentral function.
NOTE
•If an external speaker is used, the operation sound will not be heard.
Demo Mode
You can select the image from several types of demo mode.
If you have selected "Auto Play", you need to select the desired playback type(s), and then set the playback time.
Continuous: Plays demos continuously.
10 min.: Plays demos every 10 minutes.
20 min.: Plays demos every 20 minutes.
NOTE
•What kinds of setting item are available depends on the model of your TV.
•This function will be canceled when you press EXIT on the remote control unit.
•"Demo Mode" may not be selected depending on input signal type or application status.
•"Demo Mode" may be automatically canceled depending on input signal type.
Initial Setup
NOTE
•For operating the
•When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the
EZ Setup
You can run EZ Setup again, even after setting up the preset channels.
Language: Select from among 3 languages (English, French and Spanish).
Location & Time: Make settings for the country, area and time zone where you use the TV. Select your country: Select either "United
States", "Canada" or "Mexico".
Select your time zone: Select your time zone. The available settings differ depending on the selected country.
Select DST (Daylight Savings Time): Select
"Auto", "Manual" or "Off".
TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR*1 in Home mode default setting.
Home: "Power Saving" is set to "Advanced", and AV MODE is set to "STANDARD (ENERGY STAR)"*1.
Store: "Power Saving" is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set. Picture Reset: AV MODE will be set to
"DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".
Feature Demo: When "On" is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.
• ENERGY STAR qualifi cation is based on AV MODE "STANDARD (ENERGY STAR)".*1
Antenna & Cable/STB: Select the type of
connection you will use to watch TV. Air/Cable: Make sure what kind of connection
is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
•If "Cable" is selected for Antenna setting, scrambled channels are removed after the
Channel search has been completed. Network: When you connect to the Internet on the
TV, confi rm the connection method and make adjustments.
•Wireless LAN connection is possible only when the WPS (push button) method is used. If any other method is used, make settings by Initial Setup > Internet Setup > Network Setup. (See
pages 46 to 47.)
Completed: The settings confi rmation screen is displayed. Confi rm the information displayed on the screen.
NOTE
•*1: Except for
•See Initial Installation on pages 16 to 17 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try "EZ Setup" again.
•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
Broadcasting Setup
CH Setup
If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels.
Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".
CH Search: Channel auto search makes the TV look for all channels viewable in the set area.
CH Memory: You can select the channels to skip in each ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and DIGITAL (Cable).
On: Skips channels. (Channel selection disabled using CH U/V.)
Off: Does not skip channels. (Channel selection enabled using CHU/V.)
Remove Scrambled CH: This function makes the TV look for and then delete digital cable channels that are scrambled and so unavailable in the set area. The process may take more than 20 minutes.
Yes: Starts to remove scrambled channels.
No: This function does not work.
NOTE
•See Initial Installation on pages 16 to 17 for setting each item.
•If no channel is found, confi rm the type of connection made with your TV and try channel search again.
•If you select "Analog Search Start" and initiate the channel search, the CH Memory for Cable Digital will be deleted.
Favorite CH (Favorite Channel Setting)
This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily.
To register your favorite channel:
Select "Register" and then press ENTER. Press a/ b/c/d to select the position in the category, and then press ENTER to register.
To delete your favorite channel:
Select "1 Data Clear" and then press ENTER. Press a/b/c/d to select the channel you want to delete, and then press ENTER. Select "Yes" and then press ENTER.
To delete all the favorite channels, select "All Data Clear".
NOTE
•Before setting the channel, select the channel you want to register as a favorite channel.
•You can display the "Favorite CH" screen by pressing FAVORITE CH on the remote control.
Antenna Setup-DIGITAL
In order to receive digital air broadcasts, you need a digital broadcast antenna. You can confi rm the antenna confi guration through the "Antenna Setup- DIGITAL" screen. If necessary, adjust the direction of the antenna to obtain the maximum signal strength.
Signal Strength: The signal strength of DIGITAL channel is displayed. The signal information is based on the current channel.
Channel Strength: Input the
• This function is available for DIGITAL (Air) only.
28