Sharp LC60EQ10U manual System Options, Power Control

On-ScreenDisplay Menu

Example

System Options

NOTE

You cannot select a different Power Saving item for each

AV MODE.

When "Power Saving" is set, the "Automatic Light Sensor" settings for all AV Modes will automatically

For operating the on-screen display menu, see page 4-3.

Power Control

Power control setting allows you to save energy.

Audio Only

When listening to music from a music program, you can turn the screen off and enjoy audio only.

NOTE

The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE) is pressed.

Power Saving

This function allows you to set the Power Saving level in order to decrease the power consumption and increase the backlight lifespan.

Standard: Optimizes power reduction based upon video

content. When set to "Standard", "" appears on the screen.

Advanced: Optimizes power reduction based upon video content and engages Light Sensor. When set to "Advanced",

"" appears on the screen. Off: This function does not work.

NOTE

"Power Saving" does not function when you set AV MODE to "AUTO" or "DYNAMIC (Fixed)".

change.

-If you set "Automatic Light Sensor" to "On" when "Power Saving" is set to "Standard", then the "Power Saving" setting will change to "Advanced".

-When you change the "Power Saving" setting from "Advanced" to "Off" or to "Standard", "Automatic Light Sensor" will be set to "Off".

-"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off". When "Power Saving" is set to "Standard" or "Advanced",

the Power Saving leaf icon appears to the left of "Automatic Light Sensor" in the Picture Settings menu screen.

"Power Saving" is not available when the TV is in 3D mode. (For the UQ17U, TQ15U, SQ17U, SQ15U and LE657U models)

No Signal Off

When this function is enabled, the TV automatically shuts down if no signal is received for more than 15 minutes.

NOTE

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. When a TV program finishes, this function may not operate.

No Operation Off

When you enable this function, the TV automatically shuts down if no operation is performed for more than 3 hours.

NOTE

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.

ENG 4-27