Pressing quickly once takes you to the start of the next
chapter. Each time you press it, you move ahead to the start of the next chapter. (BD, DVD)
10 FLASHBACK
Press to switch between the current channel and the channel you were watching immediately before. Some manufacturers do not preset FLASHBACK. (STB)
ENG 6-17
Sets pauses and still pictures. (VCR, BD, DVD)
8
9
Enjoying Photo/Music/Video Playback
Operating the Connected Equipment
To operate the connected equipment, press STB, DVD•VCR or AUDIO to select your device. (STB
(cable/satellite set-top box), BD, DVD, VCR or AUDIO.) The remote control unit button will function as follows.
When you operate VCR, DVD or BD, press INPUT to select the terminal connected to your device.
CABLE and SAT cannot be selected at the same time.
1 POWER (SOURCE)
Turns the connected equipment power on and off.
2
Starts playback. (VCR, BD, DVD)
3
Rewinds the tape and allows picture search. (VCR)
Hold down to go in reverse. (BD, DVD)
4
Stops the tape transport. (VCR)
Playback stops when pressed. With some Blu-ray disc/DVD players, pressing the button twice may open the disc tray. (BD, DVD)
5
Pressing quickly once takes you to the start of the chapter currently playing. Each time you press it, you move back to the start of the previous chapter. (BD, DVD)
6 0–9 , • (DOT)
Press a button (or buttons) that corresponds to the channel that you wish to watch.(STB)
7
Rapidly advances the tape and allows picture search. (VCR)
Hold down to fast forward. (BD, DVD)
11CH
/
Press CH
or CH
to tune in to a higher or lower channel. (STB)
Press to select the channel of the TV tuner on the VCR. (VCR)
12MENU
When this button is pressed, the BD/DVD menu will display. (BD, DVD)
13
/
/
/
, ENTER
/
/
/
: Press the button to select items on the STB GUIDE screen or STB MENU screen. (STB)
Press the button to select items on the BD/DVD menu screen. (BD, DVD)
ENTER: Press to activate the selected function. (STB, BD, DVD)