Sharp LC60EQ10U manual Updating the Software via the Network, Software License, Manual

On-ScreenDisplay Menu

Example

Information (Continue)

5 To update the TV software with the update file, select "Yes", and then press ENTER.

CAUTION

Updating the Software via the Network

1 Press / on the Manual Update screen to select

"Network Update", and then press ENTER.

The TV connects to the network and checks for

updates.

To cancel, press ENTER.

Do not remove the USB memory device or unplug the AC cord while the software is being updated.

6 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

After this screen is displayed, the TV automatically turns off and then turns on again.

If the update has failed, check the file in the USB memory device and try Software Update again.

7 After the screen shown below is displayed, press

ENTER.

8 Remove the USB memory device.

2	The current version of the TV and the latest version of
	software are displayed. To update the TV software,
	select "Yes", and then press ENTER.
	When a server connection cannot be established or an
	update is not available, a message is displayed.
	If a server connection cannot be established, check
	the broadband connection and Internet Setup.
3	After the update file is downloaded, the software update
	process begins.

CAUTION

Do not unplug the AC cord while the software is being updated.

4 When the software is successfully updated, a screen is displayed indicating that the update process is completed.

A screen indicating that the update is completed is displayed. 4 seconds later, the TV restarts automatically. If the software was not updated successfully, check the

broadband connection and Internet Setup, and then try updating the software again.

Software License

Displays software version information.

Manual

Displays the built-in operation manual on the screen. You can read information about how to use this device.

ENG 4-34