Initial auto installation
Digital broadcast setting
Press c/dto select “Terrestrial” or “Cable”, and then press ;.
|
|
|
|
|
| Terrestrial |
| Cable |
|
|
|
|
|
|
ESearching for terrestrial broadcasts
The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.
•To abort the initial auto installation in progress, press 6.
NOTE
•A region or service selection screen may display depending on the country settings or cable providers selections. Follow the screen prompts to make the selections.
After searching for terrestrial channels, the screen switches to the “Satellite search” setting (Page 16).
ESearching for cable broadcasts
To change each item to the appropriate settings:
3Press a/bto select “Search start”, and then press ;.
4Press c/dto select “Yes” to start searching cable broadcasts, and then press ;.
5The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.
•To abort the initial auto installation in progress, press 6.
After searching for cable channels, the screen switches to the “Satellite search” setting (Page 16).
Menu | Description | Selectable items | |
Scrambled | Specifies if you |
| |
need to add pay- | Yes, No | ||
stations | |||
TV services. |
| ||
|
| ||
Search method | Specifies how | Channel, | |
you search for | |||
Frequency, Quick | |||
| channels.*2 | ||
|
| ||
Start frequency |
| From 47.0_858.0 | |
| MHz | ||
|
| ||
Network ID | Specifies the | None, 0_65535 | |
network.*3 | |||
|
| ||
Symbol rate 1/ | Input the value |
| |
received for | 1000_9000 | ||
Symbol rate 2*1 | |||
CATV.*4 |
| ||
|
|
ISet up “Symbol rate 2” if the cable provider uses several symbol rates.
JDetails about the “Search method” items are as follows:
_Channel: Extracts all information from a channel (quick, but needs corresponding TV stations). _Frequency: Checks every frequency in range (slow). _Quick: All services are searched by one frequency. This menu works only when your cable provider provides the frequency and the network ID (e.g., Homing channel). When “Quick” is selected, “Scrambled stations” is automatically set to “Yes”, and “None” for the “Network ID” menu cannot be selected.
KSet this to register only the specified network ID without registering any special services.
LThe symbol rates are specified by the cable provider.
Analogue broadcast setting
The TV searches for, sorts and stores all the receivable TV stations according to their settings and the connected antenna.
•To abort the initial auto installation in progress, press 6.
After searching for analogue channels, the screen switches to the “Satellite search” setting (Page 16).
1Press a/bto select
the menu, and then press ;.
2Press a/b/c/dor 0_9 to select or input the appropriate item/
value, and then press
;.
Scrambled stations | [Yes] |
Search method | [Channel] |
Start frequency |
|
Network ID | [None] |
Symbol rate 1 |
|
Symbol rate 2 |
|
QAM modulation 1 |
|
QAM modulation 2 |
|
Reset |
|
Search start |
|
|
|
QAM | 16, 32, 64, 128, |
modulation 1 | 256 |
QAM | None, 16, 32, 64, |
modulation 2 | 128, 256 |
15