Sharp LC-70PRO10R, LC-60PRO10R, LC-80PRO10R Replacing the Battery, Replace the battery

Enjoying 3D image viewing

Replacing the Battery	3	Replace the battery.
		1Use the tip of a ballpoint pen or similar object
The battery has an expected service life of		to remove the battery.
approximately 75 hours.		2Insert a new battery.
• When replacing the button battery, use only the		• Insert the battery with the negative side (-)
		facing up.
designated battery (Maxell branded CR2025 lithium

button battery).

1Use the tip of a ballpoint pen or similar object to press in on the lock.

2While pressing in on the lock, place your fingertip in the groove and pull out the battery holder.

• Pull the battery holder all the way out.

4Align the battery holder with the battery slot on the 3D glasses and slide it back into place.

• Press it in until it locks.

NOTE

•Take care not to reverse the battery poles (+) and (-) when loading the battery.

•Used batteries should be disposed of strictly in accordance with the applicable local laws and regulations.

70