Sharp LC-60PRO10R Audio settings, Adaptive volume, Audio adjustment, Surround, Clear voice

Basic adjustment

Audio settings

Go to “TV Menu” > “Setup” > “Audio”.

Menu

CH list	Setup
:Enter	:Back

Audio

STANDARD

Adaptive volume

[Off]

Treble

Bass

Balance

L30 R30

Audio

Adaptive volume

Adjust volume level automatically to lessen sudden volume change.

	Item
On	Adjust the volume gaps.
Off	Does not adjust the volume gaps.

Audio

Audio adjustment

You can adjust the sound quality to your preference with the following settings.

Item	c(Cursor)	d(Cursor)
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Decrease audio	Decrease audio
	from the right	from the left
	speaker	speaker

Audio

Surround

This function produces a surround effect from the speakers.

	Item
	Reproduces a life-like experience for
3D Stadium	events such as live sports or concert
	performances that take place in a stadium
	like setting.
	Reproduces a concert hall experience with
3D Hall	realistic live surround sound based on
	reverberant sounds measured in a concert
	hall.
	Reproduces a movie theatre experience
3D Movie	with realistic live surround sound based on
	reverberant sounds measured in a movie
	theatre.
3D	Creates three-dimensional surround sound
Standard	with detailed control of the signal phase.
Normal	Provides limited surround sound.
Off	Outputs normal sound.

38

Audio

Harmonics enhancer extended

This function improves the sound quality by extending the selected range.

All Range: The low range will be extended and the sounds in the medium and high ranges, which have been lost due to the data being compressed, will be restored. This setting is effective when playing back audio through a wireless interface such as when using Bluetooth playback.

Low Range: The low range will be extended.

Off: No adjustment.

Audio

Clear voice

This function emphasises speech against background noise for greater clarity.

Audio

Audio description setting

This function allows you to enable output of audio description if the TV receives a signal including audio description.

NOTE

•When the “Audio description” is set to “On”, the audio description sound is superimposed on the main audio when you select a broadcast compatible with audio description.

•If you do not clearly hear the sound for the visually impaired, go to “TV Menu” > “Setup” > “Audio” > “Audio description setting” > “Mix level”, and select the upper level to turn up the volume.

•This function is available only for DTV broadcasts. This “Audio description setting” menu is not displayed for the ATV or the external inputs.

•The audio description sound is superimposed on the main audio only when the sound is output on the speaker sound output, headphone sound output and sound for audio out output. The sound is not output on the S/PDIF sound output and the SCART sound output.

•This function is not available for the AQUOS Audio speaker system.

•This function does not work during USB-recording playback.