Sharp LC-70PRO10R, LC-60PRO10R View settings, Digital setting, Auto installation, Programme setup

Basic adjustment

View settings						4 Press a/bto select the broadcast standard	Digital setting
						you want to search, and then press ;.
						E Digital search
Go to “TV Menu” > “Setup” > “View setting”.							Terrestrial
						After selecting the service you want to search,	You can reconfigure the following settings when you
					Menu
						either “Terrestrial” or “Cable”, refer to Digital
	CH list			Setup			select “Terrestrial” in the initial auto installation or
						broadcast setting on page 15.
							the “Auto installation” menu.
	:Enter	:Back				E Analogue search
							E Additional search
						The TV searches for, sorts and stores all the
				View setting			Use this menu to add new services automatically
						receivable TV stations. Refer to Analogue
							after “Digital search” in the “Auto installation” menu
						broadcast setting on page 15.
			Auto installation				has been completed.
						E Satellite search
							E Manual search
			Channel settings
						After selecting “Satellite search”, the current
							Add new services within a specified frequency band.
			Network setup
						DVB-S/S2 setting screen is displayed. Refer to	• Enter the frequency using 0_9 numeric buttons.
						the “Satellite search” setting on page 16.	• You can perform “Manual search” with a service number
			Select recording device
							only when the five Nordic countries have been selected
						NOTE	in the country setting.
							E Manual adjust
	View setting					• After selecting “Next” in the DVB-S/S2 setting screen,
	Auto installation					you need to select your preferred satellite broadcast to	Configure various settings for each service using the
						start searching.
							colour (R/G/Y/B) buttons.

The TV automatically detects and stores all available services in your area. This function also allows you to perform the channel setting for digital, satellite and analogue individually and reconfigure the settings after the initial auto installation has been completed.

1Go to “TV Menu” > “Setup” > “View setting” > “Auto installation”.

2Press c/dto select “Yes”, and then press ;.

3Press a/b/c/dto select the desired language, and then press ;.

NOTE

•PIN input is required when executing “Auto installation”. The default PIN is “1234”. To change the PIN setting, refer to Individual setting — PIN (Page 43). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 78).

•You cannot set the Home/Store setting and the country setting in “Auto installation” in the “Setup” menu. If you want to reconfigure those settings, automatically execute initial auto installation after executing “Reset” from the “Setup” menu.

•The current country setting is displayed on the screen.

View setting

Programme setup

You can reconfigure the DTV service settings automatically or manually.

1Go to “TV Menu” > “Setup” > “View setting” > “Channel settings” > “Programme setup”.

2Press a/bto select the broadcast standard you want to reconfigure, and then press ;.

NOTE

•PIN input is required when executing “Programme setup”. The default PIN is “1234”. To change the PIN setting, refer to Individual setting — PIN (Page 43). To reset the PIN setting (PIN input will no longer be needed), refer to Reset the PIN (Page 78).

Service	Service	Lock	CH skip	Old LCN
no.	name

Lock CH skip Delete Sort

1Press a/bto select the desired service.

2Press the colour button on the remote control unit corresponding with the item you want to reconfigure.

•The ✔ mark indicates the operation is set to on. Each time the colour button is pressed, you can switch the corresponding operation on/off.

NOTE

•Depending on the installation country and/or broadcaster or operator profile may only R option is available.

40