Sharp LC-60PRO10R, LC-70PRO10R Checking signal strength, Channel strength DVB-T/T2/C/S/S2

Initial auto installation

Checking signal strength and	E Checking channel strength	5 Position and align the antenna so that the
	4 Press a/bto select “Channel strength”, and	maximum possible values for “Signal strength”
channel strength (DVB-T/T2/C/S/S2)
		and “Quality” are obtained.
	then press ;.

If you install a DVB-T/T2/C/S/S2 antenna for the first			• You can input a specified frequency band using the			NOTE
time or relocate it, you should adjust the alignment			0_9 numeric buttons.			• The values of “Signal strength” and “Quality” indicate
			Channel strength of DVB-T/T2			when to check the appropriate alignment of the
of the antenna to receive a good reception while
						antenna.
checking the antenna setup screen.
			Supply voltage			Supplying power to the antenna
1 Go to “TV Menu” > “Setup” > “View setting” >				Frequency	MHz
			Signal strength
“Channel settings” > “Antenna setup-DIGITAL”.			Channel strength	CH No.		You must supply power to the antenna in order
2 Press a/bto select “Digital setup” or “Satellite				Signal strength
						to receive digitally/terrestrially broadcast stations
setup”, and then press ;.
				Current	Max.	after connecting the antenna cable to the antenna
E Checking signal strength
				Quality		terminal on the rear of the TV.
3 Press a/bto select “Signal strength”, and then				Current	Max.	1 Go to “TV Menu” > “Setup” > “View setting” >
press ;.						“Channel settings” > “Antenna setup-DIGITAL” >
Signal strength for DVB-T/T2/C			Channel strength of DVB-C			“Supply voltage”.
						2 Press c/dto select “On”, and then press ;.
Supply voltage
			Supply voltage
Signal strength				Frequency	MHz
			Signal strength
Channel strength	CH No.			Symbol rate
			Channel strength
	Signal strength			QAM modulation
	Current	Max.		Signal strength
	Quality			Current	Max.
	Current	Max.		Quality
				Current	Max.
Signal strength for DVB-S/S2

	Channel strength of DVB-S/S2
Signal strength

Channel strength		Signal strength
			Frequency	MHz
		Channel strength
Signal strength			Symbol rate
Current	Max.		Band	Vert/Low
			Signal strength
Quality
Current	Max.		Current	Max.
			Quality
			Current	Max.

17