Other useful features
Time shift +
You can enjoy DTV/SAT recording or playback by connecting a commercially available USB storage device to the TV.
•Time shift + does not work for ATV, external inputs, data broadcasts, radio broadcasts or network applications.
Connecting a USB storage device
Connect a commercially available USB storage device to the USB port of the TV.
•USB storage device: USB memory or USB HDD
•Be sure to read the operation manual for the USB storage device.
•At least USB storage devices with memory between 1GB and 2TB and under are required for time shift to register.
•The USB 2 (HDD) port is compatible with portable USB HDD which can operate with the power supply from the USB port (bus powered drive).
•Refer to Disconnect the USB storage device when removing the USB storage device (do not remove the USB storage device during time shift operation).
NOTE
•The supplied USB memory is used for the operation manual of this TV and may not be used for time shift.
•Time shift may take a few moments to start after the TV is turned on.
•This function may not work properly for some USB storage devices.
•Do not connect and disconnect a USB storage device from the TV repeatedly.
USB storage device registration
It is necessary to first perform USB storage device registration for USB storage devices used for time shift.
Directly connect only one USB storage device to the USB port while registering the USB storage device (when two or more USB storage devices are connected, USB storage device registration is not available).
• The screen prompt pops up.
When the USB storage device is connected to the TV Register the USB storage device. Follow the
•All the data on the USB storage device is deleted after USB storage device registration.
NOTE
•In order to use time shift, it is necessary to change the “Quick start” setting to “Auto (Time shift)” or “On”.
•Only one USB storage device for time shift can be registered on the TV. Two or more USB storage devices for time shift cannot be used at the same time.
•If a registered USB storage device is inserted, a screen prompt will not be displayed.
Disconnecting the USB storage device
When you disconnect the USB storage device, be sure to the following steps.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Device removal”.
NOTE
•This menu item cannot be selected when a USB storage device for time shift is not registered.
•The USB storage device registration for time shift is cancelled in the following cases:
−When the USB storage device is removed.
−When another USB storage device is registered for time shift; only one USB storage device can be registered for time shift.
•Recorded data is deleted when removing the USB storage device or turning off the TV.
44