Appendix
Specifications (Wireless LAN USB adapter)
Product name |
| Dual Band 802.11n USB2.0 adapter | |
Standard |
|
| IEEE 802.11a/b/g/n |
Host interface |
| USB2.0 | |
Frequency band |
| 2412_2484 MHz | |
|
|
| 5150_5850 MHz |
Security |
|
| Static WEP (64/128 bit, key index 1 only) |
|
|
| |
|
|
|
|
Modulation |
| DBPSK@1 Mbps | |
|
|
| DQPSK@2 Mbps |
|
|
| CCK@5.5/11 Mbps |
|
|
| BPSK@6/9 Mbps |
|
|
| QPSK@12/18 Mbps |
|
|
| |
|
|
| |
|
|
| Mbps |
Transmit | Tx | 2.4 GHz | 11b 17 e/_ 1.5 dBm |
power and | output |
| 11g 14 e/_ 1.5 dBm |
sensitivity | power: |
| 11n 13 e/_ 1.5 dBm |
| (Typical) | 5 GHz | 11a 14 e/_ 1.5 dBm |
|
| (5150_5250 MHz, | 11n 13 e/_ 1.5 dBm |
|
| 5250_5350 MHz) |
|
|
| 5 GHz | 11a 13 e/_ 1.5 dBm |
|
| (5470_5725 MHz, | 11n 13 e/_ 1.5 dBm |
|
| 5725_5850 MHz) |
|
| Rx sensitivity: (Typical) | _84 dBm@11 Mbps | |
|
|
| _72 dBm@54 Mbps |
|
|
| _64 |
|
|
| _61 |
Current Consumption (DC 5V) | Tx: 2.2 W (Typical) | ||
|
|
| Rx: 1.4 W (Typical) |
Weight |
|
| 13 g |
Dimensions |
| 20.0 (W) g73.3 (D) g8.0 (H) mm | |
Operating temperature | 0 °C to e40 °C | ||
NOTE
•This TV has received the following certifications when connected in an environment using the supplied SHARP wireless LAN adapter.
•When there is significant interference in the 2.4_GHz frequency (such as from other wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN access point that supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of your access point.
•Before transferring to a third party or disposal, be sure to initialize the wireless LAN settings.
•Wireless LAN USB adapter (WN8522D
•Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter may result in radio communications that do not comply with regulations on radio communications. Therefore, do not use a wireless LAN adapter other than the supplied SHARP wireless LAN adapter.
73