Sharp LC-70LE741S, LC-70LE740E, LC-70LE740RU Wireless connection overview, Wireless installation

7 The connection test result will be displayed on the screen. Follow the on-screen instructions for the settings after this step.

58

Perform “Connection test” after the connection is completed. Press c/dto select “Yes”, and then press ;.

Confirm the WPS location and then press ;to go to the next step.

4 Press a/bto select “Wireless”, and then press ;.

5

6

E How to connect

1 Switch on your router before starting the network installation.

2 Connect the wireless LAN USB adapter (supplied) to the USB 3 (WIRELESS LAN) port on the rear of the TV.

• Do not use a wireless LAN adapter other than the supplied SHARP wireless LAN adapter, as operations cannot be guaranteed.

3 Go to “HOME” > “Network setup” > “Auto setup”, and then press ;.

NOTE

• Follow the on-screen instructions when setting manually.

Go to “HOME” > “Network setup” > “Manual setup”.

Network setup

Wireless installation

Use the wireless LAN USB adapter supplied with the TV.

EWireless connection overview

PC

Wireless LAN router/access point

 Wireless LAN USB adapter (supplied)  Network

NOTE

•When using the SHARP wireless LAN USB adapter (supplied), try to provide as much free space around the device for best performance.

•Make sure the firewalls in your network allows access to the TV wireless connection.

•Operations cannot be guaranteed when used with access points that do not have Wi-Fi® certification.

•A wireless LAN access point is required to connect the TV to the Internet using a wireless LAN. See the operation manual of your access point for setup.

NOTE

•When not using “Push button”, perform the settings from “HOME” > “Network setup” > “Manual setup” > “Connection type”.

•To connect your TV to the internet, you must have a broadband internet connection.

•If you do not have a broadband internet connection, consult the store where you purchased your TV or ask your internet service provider or telephone company.

•There is no need to enter the security key for subsequent connections to the wireless network.

•If your access point is set to a stealth mode (that prevents detection by other devices), you may not be able to establish a connection. In this case, disable the stealth mode on the access point.

•If you want to change the IP settings manually, go to “HOME” > “Network setup” > “Manual setup” > “IP setup” and follow the on-screen instructions and the operation manual of the router.

•See page 73 to check the supplied SHARP wireless LAN adapter specifications.