Other useful features
Display information regarding time shift
Channel display
Channel information displays by pressing p on the remote control unit.
Audio (ENG) | STEREO |
Video |
|
Subtitle | Off |
Time shift playback available
>>New information
The recording icon shows up when REC E is pressed and the TV is recording the programme.
The status icon shows up depending on what is shown on the screen.
This icon is displayed when the TV has playable time shift memory. Press dto playback the contents of the time shift memory.
Counter
The counter displays when you set “On” in “Display the Time shift memory” (Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting”).
Time shift
Memory used:
The grey bar shows how much memory is in use.
This blue point shows how much time has progressed.
“FULL” shows up when the grey bar reaches the right edge. The TV starts overwriting the previously recorded data.
NOTE
•You can also call up the information above by pressing CONTROL on the remote control unit or select “Control (Time shift)” from “HOME” > “TV Menu” > “Setup” > “Option” > “Option for view”.
View setting
Clear the Time shift memory
You can clear the time shift memory.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Clear the Time shift memory”.
NOTE
•If you perform this menu during selecting “Auto (Time shift)” in the “Quick start” menu, “Quick start” will be automatically set to the same status as “Off”.
View setting
Auto input selection
You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK or an Euro SCART compatible signal on the TV during time shift operations.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Auto input selection”.
Item
| Release time shift when receiving | |
Enable | an AQUOS LINK or a Euro SCART | |
compatible signal. Switch input source | ||
| ||
| automatically. | |
| Time shift continues to work. The TV does | |
Disable | not switch input source automatically | |
even when receiving an AQUOS LINK or a | ||
| ||
| Euro SCART compatible signal. |
View setting
Jump time setting
You can set the time interval for playback to resume after jumping backwards/forward.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Jump time setting”.
•A time interval from 10 sec. to 99 min. 50 sec can be selected.
NOTE
•You can use the time interval you set using the aor bbuttons.
View setting
Device registration
You need to perform this function to register the USB storage device for the time shift.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Device registration”.
•Refer to USB storage device registration (Page 44).
NOTE
•Only one USB storage device can be registered for time shift. Remove all USB storage devices except the one used for time shift.
•At least USB storage devices with memory between 1GB and 2TB and under are required for time shift to register.
•Some USB storage devices, such as ones which have multiple drives, etc., cannot be used for time shift.
View setting
Device check
You can manually check the condition of a USB storage device to be used for time shifting.
Go to “HOME” > “TV Menu” > “Setup” > “View setting” > “Time shift setting” > “Device check” > select “Yes”.
NOTE
•This menu item cannot be selected when a USB storage device for time shift is not registered.
47