Sharp LC-70C7450U Using the 3D Glasses with Power Supply, Removing the Battery for Recycling

Page 48

Enjoying 3D Image Viewing

Using the 3D Glasses with Power Supply

If you slide the switch to 3D or 2D after taking steps 1 and 2 in Recharging the 3D Glasses (see page 45), you will be able to supply power to the 3D Glasses while using the glasses (battery will not be recharged).

•Do not move around while wearing the 3D Glasses. Doing so may result in getting your feet caught in the USB cable, the TV falling or other accidents that may cause injury.

•When you supply power to the 3D Glasses, only connect a USB cable (commercially available) to a USB terminal on the TV.

•When you use the USB cable connecting the 3D Glasses, be careful not to get your feet caught in the USB cable.

It may result in falling or other accidents that may cause injury.

Removing the Battery for Recycling

The following instruction and procedure is provided solely as a guide for the safe removal of the Li-ion battery for proper disposal. This product is not repairable. Do not attempt to replace the battery; once the 3D Glasses are taken apart, they cannot be reassembled or used again.

-Please take special care in handling small parts such as screws specially around children that can accidentally swallow them.

-Be very careful in handling the battery to prevent it from leaking.

-Do not attempt to dismantle or puncture the battery.

-Do not use this battery for any other purpose. Recycle properly after removing it from the 3D Glasses.

If you have any question regarding proper recycling please call 1-800-822-8837 (see page 51 for more details).

1Pull out the nose pad with your fi ngers.

3Pull the front casing outward with your fi ngers while pulling the base of the right temple arm inward with your fi ngers (s).

1 Front casing

2Base

3Right temple arm

4Cut off the three cables of the rechargeable battery unit one by one with a pair of scissors.

•There is the rechargeable battery unit inside 2 on the right temple arm shown below.

•Insulate the tip of the removed rechargeable battery cables, with material such as electrical tape, be sure to insulate all three battery cable tips to prevent the conductor wires from touching each other.

1 Right temple arm

2 Rechargeable battery unit

3 Rear casing

2 Remove the fi ve screws with a Phillips screwdriver (commercially available).

5 Pull out the entire rechargeable battery unit and remove it from the rear casing.

• Used batteries should be handled in accordance with local laws and regulations.

46

Page 47 Page 49
Image 48
Page 47 Page 49
Contents LC-70C8470U LC-60C8470U LC-70C7450U LC-60C7450U Page Model No To aid reporting in case of loss or theft, please recordFCC Compliance Statement Industry Canada StatementAdditional Safety Information Dear Sharp CustomerPrecautions when transporting the TV Caring for the cabinetChild Safety Caring for the front panel3D Glasses Contents Accessories Supplied AccessoriesOptional Accessories Part name Model numberAttaching the Stand LC-70C8470U/LC-70C7450ULC-60C8470U/LC-60C7450U Insert the stand into the openings on the rear of the TVUsing the Remote Control Unit Insert the batteries into the remote control unit. SeeExperiencing HD Images Installing Batteries in the Remote Control Unit Connecting Antenna CablePreparation AntennasAudio in terminal RS-232C terminalComponent terminals Audio OUT terminal Remote Control Unit Part NamesConnecting to video equipment or PC Connecting to audio equipmentIntroduction to Connections Types of ConnectionDVI-HDMI conversion cable Mm stereo minijack cable When Video Yellow AUDIO-L White AV cable AUDIO-R RedWhen It is Letting *1See page 34 for details on the Output Select function Connecting to External Equipment Turning On/Off the Power Initial InstallationLanguage Language setting Watching TVAir/Cable Antenna setting Watching TVAntenna & Cable/STB TV LocationPress a/b to select Wired or Wireless, and then press Enter Connection using an Ethernet cableWatching TV CH Search Channel search NetworkExamples of the settings confirmation screen When you have made network settings in stepWatching TV Completed Changing Volume Sleep TimerDirect Button Operation Changing ChannelsMTS/SAP stereo mode Direct Button OperationSmartCentral Displays the Netfl ix screen Press NetflixDigital broadcasting audio mode Closed Captions and Digital Closed CaptionsPress CC ExamplesPress View Mode You can select the screen sizeFor HD programs For 43 programsOn-Screen Display Menu On-Screen Display Menu OperationMenu Operation Buttons Lcfont embeddedMenu Items On-Screen Display MenuPicture Settings AV Mode Changing Pic.QualityOPC Setting Advanced Picture SettingsColor Temp Color Temperature Fine tuning the color temperatureGamma Adjustment Film Mode 32 pull-downAudio Settings Auto Volume3D Surround Bass EnhancerPower Control Power SavingNo Signal Off Audio Only No Operation OffTerminal Setting System OptionsView Option Menu Design Game Play Time Icon Light Up Setting Demo ModeYou can select the image from several types of demo mode AquoMotion240/SmartCentral/Feature Demo/ Auto PlayBroadcasting Setup CH SetupReset Wall Mount Audio SetupIndividual Setup LanguageWhen setting an individual content-based rating item ChipChip is an electronic fi ltering device built into your TV Parental GuidelinesHow to temporarily release the V-CHIP Block Canadian English RatingsCanadian French Ratings Reactivating the temporarily released V-CHIP BlockSoftware Update InformationIdentification Digital Caption Info Digital Caption InformationOn-Screen Display Menu Press Enter to start checking the data in the USB Memory device Select Yes, and then press EnterDuring the data checking, Checking blinks After the screen shown below is displayed, pressEnjoying 3D Image Viewing Display Methods for 3D and 2D ImagesSupplied Accessories for 3D Glasses 3D Glasses for LC-70C8470U/LC-60C8470UEnjoying 3D Image Viewing Part NamesUsing the 3D Glasses Attaching the Nose PadUsage Range of the 3D Glasses Recharging the 3D GlassesUsing the 3D Glasses with Power Supply Removing the Battery for RecyclingRight temple arm Rechargeable battery unit Rear casing Front casing Base Right temple armWhen 3D Auto Change is set to Mode 1 or Mode When 3D Auto Change is set to OffSwitching from 3D to 2D Mode Viewing 3D ImagesConfiguring the TV Settings to Enhance 3D Image Viewing Switching to the Previous ModeWatching 2D Images in 3D 3D Menu3D Setup 3D Glasses lenses 3D Glasses infrared receiverWithin the specifi ed usage temperature range Specifications 3D GlassesExample Black colored glasses manufactured on April 10 B 1 4 a Manufacture number Color Year MonthConnecting a Home Network Dlna Server Selecting the Folders to Play Back Enjoying Photo/Music/Video PlaybackUSB Device Compatibility Home Network Dlna Server CompatibilityPhoto Mode Music Mode Video Mode Set/Reset All Auto PlayButtons for playing mode Buttons for file selecting operationsUsing the operation panel Buttons for using the USB operation panelButtons for using the Home Network Dlna operation panel Menu for playing modePlaying Back Files from a Portable Device or PC Presetting Remote Control Function Presetting manufacturer codesOther Viewing Options Operating the Connected EquipmentOther Viewing Options Manufacturer codes Using Aquos Link Controlling Hdmi Equipment Using Aquos LinkUsing Aquos Link Aquos Link SetupOne Touch Playback Link Operation Menu One Touch RecordingStart/Stop Recording Press REC to start recordingRecorder Power On/Off Change Surround ModeDevice Operation Panel Link Booking Rec. BookUsing a Smartphone with the TV Operation Using the Remote ControlAuto Input Selection Back panel vertical inputsUsing a PC Input signalDisplaying a PC Image on the Screen Normal Zoom Stretch Dot by DotAdjusting the PC Image Setting Audio InputPC Compatibility Chart Using a PCControl of the TV Using a PC Command table Commands not indicated here are not guaranteed to operate+Using the wireless LAN Wireless LAN router Access point ModemInternetInternet Setup Using the InternetInteractive Service Wireless SetupIP Setup Press a/b to select IP Setup, and then pressAquos Advantage Live Checking Your Internet ConnectionEntering Text Software Keyboard Using the Browser About linksENTER, a/b/c/d Press the button to return to the TV screenUsing the Toolbar Opening a Bookmarked Browser SettingsBrowsing Web Contents Saving the URL of the CurrentUsing Applications via the Internet Using the Application WindowDeactivating Netflix Function Deactivating the Vudu FunctionPress a/b to select Netfl ix Help, and then press Press c/d to select Deactivate, and then pressEnjoying Skype PreparationGetting Started Using Skype Adding Your Friends to Your Contact listSign In to Skype Skype Main MenuSettings Contact Option menuVideo Call Screen Normal View Receiving Skype CallsTerms of Use Disclaimers LC-60C8470U/LC-60C7450U Setting the TV on the Wall Using an optional bracket to mount the TVAN-52AG4 About setting the TV angle AppendixTroubleshooting Pages 26Pages 29 Troubleshooting 3D Images Troubleshooting Error MessageError code Possible Solution Displayed on a screen E202Trademarks Specifications Model LC-70C8470U Model LC-60C8470U LC-70C7450UWireless LAN SpecificationsSecret number is SpecificationInformation on the Software License for This Product Information on the Software License for This Product NTPOpenSSL Including the GNU Public LicenceCalling for Service Limited WarrantyPage Dimensional Drawings AN-52AG4Sharp Electronics Corporation
Top Page Image Contents