Sharp LC-60C7450U, LC-70C7450U Setting the TV on the Wall, Appendix, Hanging on the wall

Appendix

Setting the TV on the Wall

CAUTION

•This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualifi ed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

AN-52AG4

0°/5°/10°

About setting the TV angle

•The “c” position is at the center of the display.

•Refer to the operation manual of AN-52AG4 for details.

Vertical mounting Angular mounting

•Due to the terminal configuration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

•To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4 locations on the rear of the TV, and then use the screws supplied with the wall mount bracket to secure the bracket to the rear of the TV.

1

2

1

1

1

2

84