Sharp LC-52LE700 Press Menu to display the Menu screen, and then, Press Menu to exit, Example

On=Screen Display Menu

Cmmrmu-

You can adjust the sound quality to your preference with the following settings.

Example

[ _ Audio ]

Power control settinc allows you to save energy.

Example

FREEZEMENU Ii

_J Power Control

o ®j

			-- FAVORITECH	--
			®©©@
	1 Press MENU to display the MENU screen, and then
		press _1/1_ to select "Power Control".
	2	Press A/V	to select a specific adjustment	item,
		and then press ENTER.
..........	3	Press A/T	(or 4/1_) to select the desired setting,
		and then press ENTER.
	Ai,!E/I
	4	Press MENU to exit.

1 Press MENU to display the MENU screen, and then press 41/1_ to select "Audio".

2 Press A/V to select a specific adjustment item.

o Select "Surround" or "Bass Enhancer" and then press ENTER to set each item.

3 Press A/T (or 4t/1_) to select the desired setting, and then press ENTER.

4 Press MENU to exit.

This function allows you to set the Power Saving level

in order to decrease the power consumption and increase the backlight lifespan.

Standard: Optimizes power reduction based upon video content. When set to "Standard", "_" appears on the screen.

Advanced: Optimizes power reduction based upon video

content and engages OPC. When set to "Advanced",

.... appears on the screen.

Off: This function does not work.

"Power Saving" does not function when you set "AV

Treble	For weaker	treble	For stronger	treble
Bass	For weaker	bass	For stronger	bass
Balance	Decreaseaudio from		Decrease audio from
	the right speaker		the left speaker
o Audio menu is grayed out when Output Select is set to
"Variable".	(See page 28.)

For resetting all Audio adjustment items to the factory preset values, press h,/T to select "Reset", press ENTER, press 4/I_ to select "Yes", and then press ENTER.

MODE" to "DYNAMIC (Fixed)".

You cannot select a different Power Saving item for each

AV MODE.

When "Power Saving" is set, the "OPC" settings for all AV Modes will automatically change.

--If you set "OPC" to "On" when "Power Saving" is set to "Standard", then the "Power Saving" setting will change to "Advanced".

--When you change the "Power Saving" setting from "Advanced" to "Off" or to "Standard", "OPC" will be set

to "Off".

--"DYNAMIC (Fixed)" will remain set to "Off".

When "Power Saving" is set to "Standard" or "Advanced",

the Power Saving leaf icon appears to the left of "OPC" in the Picture menu screen.

Surround function allows you to enjoy realistic "live" sound. On" Surround function is on.

Off: Normal sound.

,,You can choose Surround by pressing SURROUND on the remote control unit. (See page 15.)

Audio menu is grayed out when Output Select is set to "Variable". (See page 28.)

For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player.

This function allows you to enjoy bass-enhanced sound. On" Bass Enhancer function is on.

Off: Normal sound.

You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.)

When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute. "Disable" is the factory preset value.

When a TV program finishes, this function may not operate.

When set to "Enable", the power will automatically shut down if there is no operation for 3 hours.

When it is 5 minutes before the power shuts down, the

Audio menu is grayed out when Output Select is set to "Variable". (See page 28.)

remaining time will start to keep appearing every minute. "Disable" is the factory preset value.

@- 23