Appendix
Problem | Possible | Solution | |
o No power | o Check if you pressed TV POWER on the | remote | control unit. =_Page 14 |
| If the indicator on the TV does not light up, press | POWER on the TV. | |
| o Is the AC cord disconnected? _ Page 7 |
|
|
| o Has the power been turned on? ,,_Page 14 |
| |
o Unit cannot be operated, | o External influences such as lightning, static electricity, may cause improper | ||
| operation. In this case, operate the unit after first turning off the power of the TV or | ||
| unplugging the AC cord and replugging it in after | 1 or 2 minutes. | |
o Remote control unit does not operate,
o Is the FUNCTION set correctly? Set it to the TV setting position. o Are batteries inserted with polarity (+,
o Are batteries worn out? (Replace with new batteries.) o Are you using it under strong or fluorescent lighting?
o Is a fluorescent light illuminated near the remote control sensor?
o Picture is cut off/with sidebar screen,
o Strange color, light color, or color misalignment
o Power is suddenly turned off.
No picture
No sound
o The TV sometimes makes a cracking sound.
The original home page cannot be displayed.
Some Internet functions used on a PC are not available from the TV.
o Is the image position correct? =_Page 25
o Are screen mode adjustments such as picture size made correctly? =$Pages 18 and 43
o Adjust the picture tone. _, Pages 21 and 22
o Is the room too bright? The picture may look dark in a room that is too bright.
o Is the sleep timer set? _ Page 15
o Check the power control settings. =_ Page 23
o The unit's internal temperature has increased. Remove any objects blocking vent or clean.
o Is connection to other components correct? =_ Pages 12, 13, 38 and 42 Is correct input signal source selected after connection? ,_ Page 28
Is the correct input selected? ,_ Page 28
Is picture adjustment correct? ,,_Pages 21 and 22 o Is "On" selected in "Audio Only"? =$ Page 28
Is a
o Is the volume too low? =_Page 15
o Is "Variable" selected in "Output Select"? =_ Page 28
o Have you pressed MUTE on the remote control unit? _ Page 15
o This is not a malfunction. This happens when the cabinet slightly expands and contracts according to change in temperature. This does not affect the TV's performance.
Is the ETHERNET cable connected correctly? ,_ Page 46
Check the settings of "Communication Setup" and "Interactive Service". =_Page 47
The TV has only limited functions compared with regular PC browsers. =_ Page 48
The error message about reception of broadcast |
|
|
|
|
| ||
The example | of an error message | Error code |
|
| Possible | Solution | |
displayed on a screen |
|
|
|
|
|
| |
o Failed to receive broadcast. | E202 | o Check | the | antenna cable. | Check that the antenna is correctly | ||
|
|
| setup. |
|
|
|
|
o No broadcast | now. | E203 | o Check | the | broadcast time | in the | program guide. |
Q- 54