Sharp LC-52LE700, LC-40LE700, LC-46LE700 operation manual Resolution

Using a PC

1Press MENU to display the MENU screen, and then press 4/1_ to select the Setup or Option menu.

. For adjusting "Auto Sync." or "FineSync.",select the Setup menu.

. For setting "PC Audio Select", select the Option menu.

2Press A/V to select a specific adjustment item, and then press ENTER to set each item.

3Press A/V (or 4/1_) to select or adjust the desired setting, and then press ENTER.

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image." displays.

No: This function does not work.

. When Auto Sync. is successful, "Completed" displays. If not, Auto Sync. failed.

. Auto Sync. may fail even if "Completed" displays.

. Auto Sync. may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing Auto Sync.

. Be sure to connect the PC to the TV and switch it on before starting Auto Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using Auto Sync. In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

Clock: Adjust when the image flickers with vertical

stripes.

Phase: Adjust when characters have low contrast or when the image flickers.

. For resetting all Fine Sync. adjustment items to the factory preset values, press A/Y to select "Reset", and then press

ENTER.

o It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

. The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

. The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Determines whether the AUDIO terminal is used for

INPUT 4 (PC-IN) or INPUT 6 (HDMI).

input 4 (PC}: Select this item when the audio signal is

input via the INPUT 4 (PC-IN) terminal using an analog RGB cable.

input 6 (HDMI}: Select this item when the audio signal is input via the INPUT 6 (HDMI) terminal using an HDMI- DVI conversion cable.

. When "PC Audio Select" is set to "Input 6 (HDMI)", sound

will not be produced if you use only an HDMI-certified

cable to connect HDMI-compatible equipment. To produce

sound, you should make an analog audio connection.

. If you want to connect HDMI-compatible equipment using

only an HDMI-certified cable, set "PC Audio Select" to "Input 4 (PC)".

It is necessary to set the PC correctly to display XGA and WXGA signal.

Resolution		Horizontal		Vertical		VESA
		Frequency		Frequency		Standard
	720 x 400	31.5	kHz	70	Hz
VGA		31.5	kHz	60	Hz	O
	640 x 480	37.9	kHz	72	Hz	O
		37.5	kHz	75	Hz	O
		35.1	kHz	56	Hz	O
SVGA	800 x 600	37.9	kHz	60	Hz	O
		48.1	kHz	72	Hz	O
		46.9	kHz	75	Hz	O
		48.4	kHz	60	Hz	O
XGA	1024 x 768	56.5 kHz		70	Hz	O
		60.0	kHz	75	Hz	O
WXGA	1360 x 768	47.7 kHz		60	Hz	O
SXGA	1280 x 1024	64.0 kHz		60	Hz	O
SXGA+	1400 x 1050	65.3 kHz		60	Hz	O
UXGA	1600 x 1200	75.0 kHz		60	Hz	O

VGA and XGA are registered trademarks of International i

Business Machines Corp. l

Q- 44