Sharp LC-46LE700, LC-52LE700 Input, Select the input signal type from the list below, Auto View

On=Screen Display Menu

Example

_ Option

1 Press MENU to display the MENU screen, and then press 4/1_ to select "Option".

2 Press A/V to select a specific adjustment item and then press ENTER.

3 Press A/T (or 4t/1_) to select the desired setting, and then press ENTER.

4 Press MENU to exit.

• Skip this step for "Audio Only".

When listening to music from a music program, you can turn the screen off and enjoy audio only.

On: Audio is output without screen image.

Off: Both screen images and audio are output.

=The screen image will return to normal when a button (except those for audio adjustment, such as VOL, MUTE, SURROUND, AUDIO)is pressed.

Different sound sources sometimes do not have the

same volume level, such as a program and its commercial breaks. The Automatic Volume Control

(Auto Volume) reduces this problem by equalizing levels.

This function emphasizes speech against background noise for greater clarity.

If the image does not come in clearly from the external equipment connected to INPUT 1 or INPUT 2, you

may need to change the input signal type setting on the "Input Select" menu.

[] INPUT 1

Select the input signal type from the list below:

Auto/COMPONENT/ViDEO

[] INPUT 2

Select the input signal type from the list below: Auto/COMPON ENT/S=TERMINAL

=If the selected signal type is incorrect, images are not displayed at all or are displayed without any color.

=Refer to your external equipment operation manual for the signal type.

=If you set INPUT 1 or 2 to Auto, the TV will automatically select the input signal.

=Setting INPUT 1 or 2 signal selection to "Auto" when other equipment is connected will result in the following

connection priority. INPUT 1:

(_ COMPONENT VIDEO (_) VIDEO

INPUT 2:

(_) COMPONENT VIDEO

(_) S-VIDEO

To watch an HDMI or PC-IN equipment image, select "INPUT5", "INPUT6", "INPUT7" or "INPUT8" from INPUT SOURCE menu using iNPUT on the remote control unit or on the TV.

Auto View:

Enable: To use View Mode based on signal recognition,including an HDMIsignal.

Disable: No function.

=Refer to your external equipment operation manual for the signal type.

=When connecting an HDMI-DVl conversion adapter/cable to the HDMI terminal, the image may not come in clearly.

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL +/- on the remote control unit or VOL +/- on the TV.

Sound via the AUDIO OUTPUT terminal is not

adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUTPUT terminal is

adjusted with VOL+/- on the remote control unit or

VOL+/- on theTV.

Sound via speaker is muted.

@- 28