Sharp LC-60LE832U, LC-40LE832U, LC-46LE832U Using Aquos Link, Aquos Link Setup, One Touch Playback

Using AQUOS LINK

AQUOS LINK Setup

Example

System Menu

Options

System Options

AQUOS LINK Setup

AQUOS LINK Control

[On]

Auto Power On

[Yes]

Selecting Recorder

Channel Select Key

Audio Return Channel

[Auto]

1Press MENU to display the MENU screen, and then press c/d to select "System Options".

2Press a/b to select “AQUOS LINK Setup”, and then press ENTER.

3Press a/b to select a specifi c item, and then press

ENTER.

4Press a/b (or c/d ) to select the desired setting, and then press ENTER.

Channel Select Key

This function can be set for each input terminal.

On: The remote control unit of the TV can be used to select the channel, display program information, and perform other operations of a connected AQUOS LINK-compatible recorder.

Off: This function does not work.

Audio Return Channel

This function allows you to listen to the TV audio via audio equipment without using an optical fi ber cable, which conventionally is required.

Requirements for using an ARC-compatible AV amplifier:

•ARC-compatible AV amplifi er connected to the ARC- compatible HDMI terminal (HDMI 1).

(Refer to the operation manual of the ARC-compatible equipment for details.)

•Use of an ARC-compatible cable.

Auto: You can listen to the TV audio with ARC- compatible audio equipment.

Off: This function does not work.

•If the TV audio cannot be output from the AV amplifi er even after making the necessary settings, connect the TV to the AV amplifi er with an optical fi ber cable and select “Off”.

5 Press MENU to exit.

One Touch Playback

AQUOS LINK Control

Select AQUOS LINK Control to disable AQUOS LINK function even when an AQUOS LINK-compatible HDMI device is connected to the TV. This function prevents the device from starting to operate unexpectedly.

On: You can operate AQUOS LINK-compatible equipment.

Off: AQUOS LINK function does not work.

Auto Power On

If this is activated, the One Touch Play function is enabled.

Yes: While the TV is in standby mode, it automatically turns on and plays back the image from the HDMI source.

No: This function does not work.

Selecting Recorder

When multiple AQUOS LINK-compatible devices are connected, this function allows you to set the recorder for recording when you press EREC on the TV’s remote control unit.

Press a/b to select the recorder for recording.

•When an AQUOS LINK-compatible audio system or other equipment is connected between the TV and recorder, “Sub” is displayed.

AQUOS LINK allows you to operate the HDMI- connected equipment with one remote control.

Press d to start playing back a title.

•The last played program is played back. You can use the following buttons during broadcast viewing.

Buttons	Description
POWER	Turns the power of the HDMI connected devices
(SOURCE)	on and off.

GHold down to go in reverse.

IStarts playback.

JHold down to fast forward.

HPlayback stops.

FSets pauses and still pictures.

Pressing quickly once takes you to the start of the

Tchapter currently playing. Each time you press it, you move back to the start of the previous chapter.

Pressing quickly once takes you to the start of the

Unext chapter. Each time you press it, you move ahead to the start of the next chapter.

•The buttons T/Udo not function with the following Blu-ray disc players currently available.

- BD-HP20U, BD-HP50U

53