Sharp LC-52LE832U Setting the TV on the Wall, Optional Accessories, Appendix, Hanging on the wall

Appendix

Setting the TV on the Wall

CAUTION

LC-40LE832U

•This TV should be mounted on the wall with both the AN-37AG2 (SHARP) wall mount bracket and the AN-37P30 (SHARP) attachment of the wall mount bracket. The TV cannot be mounted when with only the AN-37AG2 wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

LC-46LE832U/LC-52LE832U/LC-60LE832U

•This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the TV requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualifi ed service professional about using an optional AN-37AG2+AN-37P30 or AN-52AG4 bracket to mount the TV on the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2+AN-37P30 or AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

Vertical mounting Angular mounting

About setting the TV angle

LC-40/46/52LE832UAN-37AG2 + AN-37P30

0/5/10/15/20° LC-40LE832U

LC-60LE832U	• The center of the display:
0/5/10°		1/32 inch (0.5 mm) above the “A” position.
	AN-52AG4
	LC-46LE832U
	• The center of the display:
		3/32 inch (2.0 mm) under the “b” position.
	LC-52LE832U
	•	The center of the display:
		9/32 inch (7.0 mm) under the “b” position.
	LC-60LE832U
	•	The “e” position is at the center of the display.
	•	Refer to the operation manual of
		AN-37AG2+AN-37P30 or AN-52AG4 for details.

• Detach the cable tie on the rear of the TV when using the optional mount bracket.

• Due to the terminal confi guration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables.

• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4 locations on the rear of the TV, and then use the screws

supplied with the wall mount bracket to secure the bracket to the rear of 1 the TV.

2

1

Optional Accessories

The listed optional accessories are available for the Liquid Crystal Television. Please purchase them at your nearest shop.

•Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability.

Part name	Model number
Wall mount	AN-37AG2 (for LC-40LE832U)
bracket
Attachment	AN-37P30 (for LC-40LE832U)
Wall mount	AN-52AG4 (for LC-46LE832U/
bracket	LC-52LE832U/LC-60LE832U)

72