Sharp LC-60LE832U Adjusting the PC Image, Setting Audio Input, PC Compatibility Chart, Using a PC

Page 59

Using a PC

Example

System Menu

Options

System Options

View Option

AQUOS LINK Setup

Input Terminal Setting

Menu Design

O ti L k O t

1Press MENU to display the MENU screen, and then press c/d to select "System Options".

2Press a/b to select "Input Terminal Setting", and then press ENTER.

3Press a/b to select "PC input" or "Audio Select", and then press ENTER.

4Press a/b to select a specifi c adjustment item, and then press ENTER to set each item.

5Press a/b (or c/d) to select or adjust the desired setting, and then press ENTER.

Adjusting the PC Image

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image." displays.

No: This function does not work.

When "Auto Sync." is successful, "Completed" displays. If not, "Auto Sync." failed.

"Auto Sync." may fail even if "Completed" displays.

"Auto Sync." may fail if the computer image has low resolution, has unclear (black) edges, or is moved while executing "Auto Sync.".

Be sure to connect the PC to the TV and switch it on before starting "Auto Sync.".

Fine Sync.

Ordinarily you can easily adjust the picture as necessary to change image position using "Auto Sync.". In some cases, however, manual adjustment is needed to optimize the image.

H-Pos.:Centers the image by moving it to the left or right.

V-Pos.:Centers the image by moving it up or down.

Clock: Adjust when the image fl ickers with vertical stripes.

Phase: Adjust when characters have low contrast or when the image fl ickers.

For resetting all "Fine Sync." adjustment items to the factory preset values, press a/b to select "Reset", and then press

ENTER.

It is not necessary to adjust the "Clock" or "Phase" when a digital signal is being input, so it cannot be selected.

The default cursor position may not be in the center, because the screen position variable ranges may be asymmetrical.

The screen position variable ranges depend on the View Mode or the signal type. The ranges can be seen on the position-setting screen.

Setting Audio Input

Audio Select

This function sets the terminal to output the computer audio.

The adjustment items vary depending on the input source. Select the input source corresponding to the terminal connected to the PC and then adjust the desired item.

PC IN

Video: Select this when the TV and PC are connected using an analog RGB cable and the audio is not input.

Video+Audio: Select this when the TV and PC are connected using an analog RGB cable and the audio is input via a Ø 3.5 mm stereo minijack.

HDMI 1

HDMI(Digital): Select this when the TV and PC are connected using an HDMI-certifi ed cable and audio is input via the same cable.

HDMI+Analog: Select this when the TV and PC are connected using a DVI-HDMI conversion cable and the audio is input via a Ø 3.5 mm stereo minijack.

When "Audio Select" is set to "HDMI(Digital)", sound will not be produced if you use only an HDMI-certifi ed cable to connect HDMI-compatible equipment. To produce sound, you should make an analog audio connection.

If you want to connect HDMI-compatible equipment using only an HDMI-certifi ed cable, set "Audio Select" to "HDMI(Digital)".

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA and WXGA signal.

Resolution

Horizontal

Vertical

 

VESA

Frequency

Frequency

Standard

 

 

 

 

 

 

 

 

 

 

720 x 400

31.5 kHz

70 Hz

 

 

 

 

 

 

 

VGA

 

31.5 kHz

60 Hz

 

O

640 x 480

37.9 kHz

72 Hz

 

O

 

 

 

 

37.5 kHz

75 Hz

 

O

 

 

35.1 kHz

56 Hz

 

O

SVGA

800 x 600

37.9 kHz

60 Hz

 

O

48.1 kHz

72 Hz

 

O

 

 

 

 

 

46.9 kHz

75 Hz

 

O

 

 

48.4 kHz

60 Hz

 

O

XGA

1024 x 768

56.5 kHz

70 Hz

 

O

 

 

60.0 kHz

75 Hz

 

O

WXGA

1360 x 768

47.7 kHz

60 Hz

 

O

SXGA

1280 x 1024

64.0 kHz

60 Hz

 

O

SXGA+

1400 x 1050

65.3 kHz

60 Hz

 

O

UXGA

1600 x 1200

75.0 kHz

60 Hz

 

O

1080p

1920 x 1080

67.5 kHz

60 Hz

 

 

 

 

 

 

VGA and XGA are registered trademarks of International Business Machines Corp.

57

Image 59
Contents LC-40LE832U LC-46LE832U LC-52LE832U LC-60LE832U Page To aid reporting in case of loss or theft, please record Model NoIndustry Canada Statement FCC Compliance StatementDear Sharp Customer Additional Safety InformationCaring for the cabinet Precautions when transporting the TVCaring for the front panel Child SafetyContents Insert the stand into the openings on the rear of the TV Supplied AccessoriesAttaching the Stand LC-40LE832UStand into the openings on the rear LC-46LE832U/LC-52LE832ULC-60LE832U Base facing forwardAC outlet Using the Remote Control UnitInsert the batteries into the remote control unit. See Remote control sensorAntennas Installing Batteries in the Remote Control UnitConnecting Antenna Cable PreparationTV Rear Part NamesTV Front Part Names Remote Control UnitDisplaying an External Equipment Image Introduction to ConnectionsExperiencing HD Images Types of ConnectionBack panel vertical inputs Connecting to External EquipmentWhen using Hdmi cable Hdmi 1, 2, 3 or When using DVI-HDMI conversion cable HdmiBack panel surface inputs Connecting to External EquipmentWhen using Component cable Component When using Composite cable Video 1 orConnecting an AV Amplifier Connecting an Audio AmplifierSurface inputs Connecting a PCWhen using analog RGB cable PC Back panel Back panel horizontal inputs Back panel vertical inputsTV Location Turning On/Off the Power Initial InstallationLanguage Language setting Watching TVTo watch TV via a set-top box Air/Cable Antenna settingWatching TV Antenna & Cable/STB CH Search Channel searchWatching TV Completed Examples of the settings confirmation screenChanging Channels Changing VolumeSleep Timer Direct Button OperationPress Input Press Power SavingExample When the input source is TV, COMPONENT, Video 1 or Direct Button OperationThis will present the Closed Caption information display Closed Captions and Digital Closed CaptionsPress CC ExamplesFor 43 programs Press View ModeYou can select the screen size For HD programsMenu Operation Buttons Using the remote controlOn-Screen Display Menu On-Screen Display Menu OperationOn-Screen Display Menu Menu ItemsAdvanced Picture Settings Picture SettingsAV Mode Changing Pic.Quality OPC SettingColor Gamut Range Color Temp Color TemperatureGamma Adjustment Film Mode 32 pull-downBass Enhancer Audio SettingsAuto Volume SurroundAudio Only Power ControlPower Saving No Signal OffView Option System OptionsMenu Design Input Terminal SettingGame Play Time Icon Light Up SettingDemo Mode Caption SetupCH Setup Initial SetupEZ Setup Broadcasting SetupLanguage ResetWall Mount Audio Setup Individual SetupTV Parental Guidelines When setting an individual content-based rating itemChip Chip is an electronic fi ltering device built into yourReactivating the temporarily released V-CHIP Block How to temporarily release the V-CHIP BlockCanadian English Ratings Canadian French RatingsDigital Caption Info Digital Caption Information Software UpdateInformation IdentificationCall 1-800-BE-SHARP Updating the Software via the NetworkAfter the screen shown below is displayed, press Press Enter to start checking the data in the USBMemory device Select Yes, and then press Enter During the data checking, Checking blinksEthernet cable Home network Dlna server Connecting a USB Memory Device/USB Hard DriveConnecting a Home Network Dlna Server Enjoying Photo/Music/Video PlaybackUSB memory device When displaying the data with the AppsSelect the Files to Play Back Enjoying Photo/Music/Video PlaybackPlaying Back Files on a USB Memory Device Photo ModeButtons for slide show BGM select operation USB MenuSelect Slide Show Interval Select Slide Show BGMSet/Reset All Auto Play Music ModeVideo Mode Buttons for playing mode Buttons for music modeTitle/Chapter Using the operation panelMenu for playing mode USB Menu Menu for file selecting operationsDivX VOD registration DivX VOD deregistration DivX SetupPress a/b to select DivX Setup, and then press Enter USB Device CompatibilityYellow Display the Home Network Dlna Menu Screen Playing Back Files on a Home Network Dlna ServerHome Network Dlna Menu Buttons Description C/dHome Network Dlna Server Compatibility Buttons for playing modeOperating the Connected Equipment Presetting Remote Control FunctionPresetting manufacturer codes Other Viewing OptionsOther Viewing Options Manufacturer codes Controlling Hdmi Equipment Using Aquos Link Using Aquos LinkOne Touch Playback Using Aquos LinkAquos Link Setup Displaying the Link Operation Menu Link Operation MenuOne Touch Recording Start/Stop RecordingManually Changing Aquos Audio Speaker System’s Sound Mode Using the Device Operation PanelTimer Recording Playback of Titles Using Aquos LinkStretch Dot by Dot Using a PCDisplaying a PC Image on the Screen Using a PC Adjusting the PC ImageSetting Audio Input PC Compatibility ChartControl of the TV Commands not indicated here are not guaranteed to operate Using a PC Command tableAbout the original home Using the InternetConnecting to the Internet Using an Ethernet cableUsing the wireless LAN Using the InternetChecking Your Internet Connection Internet SetupInteractive Service Wireless SetupAquos Advantage Live Displaying Updated Information and Support ServiceOriginal Home Entering Text Software Keyboard About links Using the BrowserFeatured Content Close This Tab Using the Toolbar Using TabsSelected item Selected item Description Select ThisEditing Bookmarks Saving the URL of the CurrentOpening a Bookmarked View Settings Browser SettingsSecurity Settings Deactivating the Vudu Function Using Applications via the InternetDeactivating Netflix Function Disclaimers LC-60LE832U Before attaching/detaching the stand AppendixRemoving the Stand Before detaching or attaching the stand, unplug the AC cordHanging on the wall Setting the TV on the WallOptional Accessories AppendixPages 27 TroubleshootingPages 24 E203 Troubleshooting Error MessageError code Possible Solution Displayed on a screen E202Trademarks Initial Setup menuSoftware Update Information menu CH Setup Broadcasting SetupModel LC-40LE832U Model LC-46LE832U SpecificationsModel LC-52LE832U Model LC-60LE832U SpecificationsSpecification Wireless LANObtaining source code Information on the Software License for This ProductSoftware composition Software developed by Sharp and open source softwareSoftware Copyrights Information on the Software License for This ProductLimited Warranty Calling for ServiceAN-52AG4 Dimensional DrawingsAN-37AG2 AN-37P30 LC-52LE832U Sharp Electronics Corporation