Sharp LC-46G7X operation manual Audio Only, Hdmi Setup, DNR Digital Noise Reduction

Useful adjustment settings

Audio Only

When listening to music from a music programme, you can set the display off and enjoy audio only.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Option”.

3 Press a/bto select “Audio Only”, and then press ENTER.

4 Press c/d to select “On”, and then press

ENTER.

Selected item	Description
On	Audio is output without screen image.
Off	Both screen images and audio are output.

NOTE

•When you make operations that change the picture on the TV such as by changing the input source, the Audio Only function is set to “Off”.

HDMI Setup

HDMI (High-Definition Multimedia Interface) terminal selection.

1 To watch an HDMI equipment image, select “INPUT4” or “INPUT5” using TV/VIDEO on the remote control unit or on the TV.

2 Press MENU and the MENU screen displays.

3 Press c/dto select “Option”.

4 Press a/bto select “HDMI Setup”, and then press ENTER.

•The HDMI Setup can be selected only when “INPUT4” or “INPUT5” is selected.

MENU [Option ... HDMI Setup]

Option

Audio Only
DNR	[Off]
HDMI Setup

DNR (Digital Noise Reduction)

Produces a clearer video image.

1 Press MENU and the MENU screen displays.

2 Press c/dto select “Option”.

3 Press a/bto select “DNR”, and then press

ENTER.

4 Press a/bto select the desired level, and then press ENTER.

Off

High

Low

5 Press a/bto select the desired item, and then press ENTER.

HDMI Setup	Selectable items	Description
items
Signal	RGB/YCbCr 4:4:4/	Select the video signal
Type	YCbCr 4:2:2	type from the HDMI
		terminal.
Auto View	Enable/Disable	Set whether or not to use
		WIDE MODE based on
		signal recognition,
		including an HDMI signal.
Audio	Digital/Analogue	Select “Digital” for audio
Select		signal via the HDMI
		terminal. Select “Analogue”
		for audio signal via the
		AUDIO jack.

6 Press a/b/c/d to select the desired setting, and then press ENTER.

NOTE

•Refer to your external equipment operation manual for the signal type.

•Item under “Signal Type” can be selected when the equipment is connected with a DVI-HDMI conversion cable.

•When the equipment is connected with an HDMI cable, items are automatically set and cannot be selected.

•“Audio Select” is only available for INPUT5.

41