Sharp LC-46G7X operation manual Using external equipment, Input Select

Page 45

Using external equipment

Displaying an external equipment image

Explanation here is for the setting when connecting DVD to INPUT1 terminal.

NOTE

•Each time TV/VIDEO is pressed, the input source toggles.

•If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

•Refer to your external equipment operation manual for the signal type.

Input Select

Selecting input source

Can use for selecting the input source.

Using TV/VIDEO on the remote control unit or on the TV

TV/VIDEO allows you to choose from the available input sources.

1

Press TV/VIDEO on the remote control unit

 

or on the TV.

2 Press TV/VIDEO on the remote control unit or on the TV to select the input source.

•The image and sound from the selected source are output on the TV.

•You can also select the input source by pressing a/b.

Using INPUT4 or 5 (HDMI) on the remote control unit

INPUT4 or 5 (HDMI) allows you to directly select the HDMI input source.

Displaying a DVD image (Example)

1

To watch a DVD image, select “INPUT1”

 

using TV/VIDEO on the remote control unit

 

or TV/VIDEO on the TV.

 

 

 

 

 

 

 

 

 

 

 

INPUT SOURCE

 

 

 

 

 

TV

 

 

 

 

 

 

 

 

 

 

 

INPUT1

 

 

 

 

 

 

 

 

 

 

 

 

 

INPUT2

 

 

 

 

 

INPUT3

 

 

 

 

 

INPUT4

 

 

 

 

 

INPUT5

 

 

 

 

 

INPUT6

 

2

 

 

 

 

 

 

Select the desired signal type on “Input

 

Select” in the “Option” menu.

For INPUT1 signal

MENU [Option ... Input Select]

Auto

COMPONENT

VIDEO

The setting is stored and can be selected.

Press INPUT4 or 5 (HDMI) on the remote control.

•The image and sound from the HDMI input source are output on the TV.

Selecting input signal type

For setting the signal type of external equipment.

1 Press MENU and the MENU screen displays.

2

Press c/dto select “Option”.

3

Press a/bto select “Input Select”, and then

 

press ENTER.

 

4

Press a/bto select a signal type you want

 

to set, and then press ENTER.

 

 

 

 

Input source

Selectable item

 

 

 

 

INPUT 1/INPUT 2

Auto, COMPONENT, VIDEO

 

 

 

 

INPUT 3

Auto, S-VIDEO, VIDEO

 

 

 

 

INPUT 6

Auto, DIGITAL, ANALOGUE

 

 

 

NOTE

•If no (colour) image displays, try to change the other signal type.

•Check the operation manual of the external equipment for the signal type.

•When the signal type is set to “Auto”, the input terminal where cable is connected is automatically selected.

•When the signal type is set to “Auto” and multiple video signal cables are connected, the signal type is selected

in the following prioritised order:

INPUT 1/INPUT 2: COMPONENT sVIDEO

INPUT 3: S-VIDEO sVIDEO

•When the signal type for “INPUT6” is set to “DIGITAL” or “ANALOGUE”, a “PC” or “AV” signal is automatically

detected.

43

Page 44 Page 46
Image 45
Page 44 Page 46
Contents LC-46G7X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Using the remote control unit PreparationInserting the batteries Preparation Setting the TVRemoving the terminal cover Insert the cable clamps in the holes on the TV as shownUsing an optional bracket to mount the TV Setting the TV on the wallRemoving the stand Before detaching/attaching the standRemoving the speakers Before detaching/attaching the speakersUnit’s speakers can be attached and removed Anchoring the TV to the wall or a pillar Protection against overturningFixing the TV to the table View from the topConnecting to the AC outlet Connecting to an antennaBasic connection Rear viewConnecting a DVD player Connecting a VCR, game console or camcorderGame console Camcorder DVD playerConnecting a PC Preparation Connecting a Digital TV STB Set Top BoxWhen using DVI cable commercially available Digital TV STBPart names Volume display when headphones are pluggedTV Front Regarding the headphone jackPart names TV RearRemote control unit Turning off the power Turning on the powerWatching TV Simple button operations for changing channelsUsing Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Using Mute e on the remote control unit Changing the volumeTime switches as shown below MuteMenu operation buttons Basic adjustment settingsOn-Screen Display ExampleBasic adjustment settings Menu items TV/INPUT1-3 Menu items HDMI/DVIList of menu items to help you with operations Auto installation Programme setupAuto search Search tuning Basic adjustment settings Manual setting for each channelProgramme Setup Manual Adjust menu Fine tuningColour system Press a/bto select Colour sys., and then press EnterColour system menu Skipping channels Setting the child lockSkip menu Sort menusErase programme menus Basic adjustment settings Erase ProgrammeOPC Optical Picture Control setting AV Mode selectionAdjustments items Picture adjustmentsAdvanced Colour temperatureQuick Shoot BlackBasic adjustment settings Monochrome Film ModeRange of OPC Using Surround on the remote control unit Audio adjustmentUsing Surround on the menu screen Press Surround to switch the Surround function on and offPower Control Power control setting allows you to save energyNo Operation Off Password setting for child lock for TV input mode Useful adjustment settingsSetting a password Resetting the passwordConnecting external speakers Useful adjustment settingsConnecting speaker cables External Audio BypassInput Skip Input Signal PC input mode onlyINPUT5 or INPUT6 you wish to Skip, Then press Enter Press Menu to exitFine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyPress c/dto adjust the item to your Desired positionInput Label Adjustments are stored separately according to input sourceImage position Repeat until the name is fully spelt outWSS signal 43 screen Mode Panorama Mode Normal Wide Screen Signalling WSSPicture aspect ratio Press c/dto select On or Off, and then press EnterReset Standby ModeSelected item Description Mode1 Mode2Wide mode for TV/AV input mode Manual SelectionAuto Selection Input Signal Wide mode for PC input modeNormal Cinema Full Dot by Dot Full Dot by DotAudio Only Hdmi SetupDNR Digital Noise Reduction Press a/bto select the desired item, and then press EnterLanguage setting for on-screen display Colour system settingIdentification Input Select Using external equipmentTeletext function Useful featuresDisplaying Subpages Useful features Displaying SubtitleTime display Subpage screenUseful features Teletext language settingPress Freeze again to cancel the function Freezing imagesTroubleshooting Problem Possible SolutionAppendix Appendix RS-232C port specificationsPC Control of the TV Communication conditionsPC compatibility chart CommandsResponse code format Optional accessories SpecificationsModel LC-46G7X Part name Model numberDimensional drawings Clearing the Password 1300 135 Do not Return this Document to Sharp
Top Page Image Contents