Sharp LC-46G7X operation manual Setting the TV on the wall, Removing the stand

Page 9

Preparation

Setting the TV on the wall

•You can mount the TV on the wall, using the optional AN-37AG2/AN-52AG1 bracket.

•For details, refer to the instructions supplied with the optional bracket.

CAUTION

•This TV should be mounted on the wall only with the AN-37AG2/AN-52AG1 (SHARP) wall mount bracket. The use of other wall mount brackets may result in an unstable installation and may cause serious injuries.

•Installing the Liquid Crystal Television requires special skill that should only be performed by qualified service personnel. Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or mounting that results in accident or injury.

Using an optional bracket to mount the TV

•You can ask a qualified service personnel about using an optional AN-37AG2/AN-52AG1 bracket to mount the TV to the wall.

•Carefully read the instructions that come with the bracket before beginning work.

Hanging on the wall

AN-37AG2/AN-52AG1 wall mount bracket. (See the bracket instructions for details.)

Vertical mounting

Angular mounting

NOTE

About setting the TV angle and height adjustment

0˚	For AN-52AG1

10˚/5˚/10˚/15˚/20˚

2-5/0/+5 cm (can be moved 5 cm up or down)

AN-37AG2 AN-52AG1

• Detach the cable clamps on the rear of the TV when using the optional mount bracket.

Removing the stand

For wall mounting with the optional bracket, remove the stand.

Before detaching/attaching the stand

•Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet.

•Remove all terminal covers and connected cables.

•Make sure two or more people perform the operation.

CAUTION

• Do not remove the stand from the TV unless using an optional bracket to mount it.

1

2

Unfasten the four screws used to secure the stand in place.

Detach the stand from the TV.

(Hold the stand so it will not drop from the edge of the base area.)

NOTE

• To attach the stand, perform the above steps in reverse order.

7

Image 9

Contents LC-46G7X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Using the remote control unit PreparationInserting the batteries Preparation Setting the TVRemoving the terminal cover Insert the cable clamps in the holes on the TV as shownUsing an optional bracket to mount the TV Setting the TV on the wallRemoving the stand Before detaching/attaching the standRemoving the speakers Before detaching/attaching the speakersUnit’s speakers can be attached and removed Anchoring the TV to the wall or a pillar Protection against overturningFixing the TV to the table View from the topConnecting to the AC outlet Connecting to an antennaBasic connection Rear viewConnecting a DVD player Connecting a VCR, game console or camcorderGame console Camcorder DVD playerConnecting a PC Preparation Connecting a Digital TV STB Set Top BoxWhen using DVI cable commercially available Digital TV STBPart names Volume display when headphones are pluggedTV Front Regarding the headphone jackPart names TV RearRemote control unit Turning off the power Turning on the powerWatching TV Simple button operations for changing channelsUsing Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Using Mute e on the remote control unit Changing the volumeTime switches as shown below MuteMenu operation buttons Basic adjustment settingsOn-Screen Display ExampleBasic adjustment settings Menu items TV/INPUT1-3 Menu items HDMI/DVIList of menu items to help you with operations Auto installation Programme setupAuto search Search tuning Basic adjustment settings Manual setting for each channelProgramme Setup Manual Adjust menu Fine tuningColour system Press a/bto select Colour sys., and then press EnterColour system menu Skipping channels Setting the child lockSkip menu Sort menusErase programme menus Basic adjustment settings Erase ProgrammeOPC Optical Picture Control setting AV Mode selectionAdjustments items Picture adjustmentsAdvanced Colour temperatureQuick Shoot BlackBasic adjustment settings Monochrome Film ModeRange of OPC Using Surround on the remote control unit Audio adjustmentUsing Surround on the menu screen Press Surround to switch the Surround function on and offPower Control Power control setting allows you to save energyNo Operation Off Password setting for child lock for TV input mode Useful adjustment settingsSetting a password Resetting the passwordConnecting external speakers Useful adjustment settingsConnecting speaker cables External Audio BypassInput Skip Input Signal PC input mode onlyINPUT5 or INPUT6 you wish to Skip, Then press Enter Press Menu to exitFine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyPress c/dto adjust the item to your Desired positionInput Label Adjustments are stored separately according to input sourceImage position Repeat until the name is fully spelt outWSS signal 43 screen Mode Panorama Mode Normal Wide Screen Signalling WSSPicture aspect ratio Press c/dto select On or Off, and then press EnterReset Standby ModeSelected item Description Mode1 Mode2Wide mode for TV/AV input mode Manual SelectionAuto Selection Input Signal Wide mode for PC input modeNormal Cinema Full Dot by Dot Full Dot by DotAudio Only Hdmi SetupDNR Digital Noise Reduction Press a/bto select the desired item, and then press EnterLanguage setting for on-screen display Colour system settingIdentification Input Select Using external equipmentTeletext function Useful featuresDisplaying Subpages Useful features Displaying SubtitleTime display Subpage screenUseful features Teletext language settingPress Freeze again to cancel the function Freezing imagesTroubleshooting Problem Possible SolutionAppendix Appendix RS-232C port specificationsPC Control of the TV Communication conditionsPC compatibility chart CommandsResponse code format Optional accessories SpecificationsModel LC-46G7X Part name Model numberDimensional drawings Clearing the Password 1300 135 Do not Return this Document to Sharp