Sharp LC-46XL1E, LC-46XL1S, LC-52XL1E Connections menu, Decoder, Input select, Hdmi setup

Menu operations

Connections menu

TV menu

Connections		Setup
Decoder	EXT 2
Input select
HDMI setup
Supply voltage	no (0V)
AV-Link
Miscellaneous

Decoder

Make sure to select the terminal (EXT 1 or 2) to which the decoder is connected.

NOTE

•This setting will be refl ected in the “Decoder stations” function under “Miscellaneous”. (Page 19)

Input select

For setting the signal type of external equipment.

Input source	Signal type
EXT 1	Y/C, CVBS, RGB
EXT 2	Y/C, CVBS
EXT 4	PC (RGB), COMPONENT

NOTE

•If no (colour) image displays, try to change the other signal type.

•Check the operation manual of the external equipment for the signal type.

•TV, DTV, EXT3, EXT5 and EXT6 are not displayed in Input Select.

•If both CVBS and RGB signals are input to EXT 1 using a SCART cable, the TV may output an RGB signal even though you have designated CVBS for the respective terminal. This happens due to the setting of your external equipment.

HDMI setup

HDMI (High-Defi nition Multimedia Interface) terminal selection.

1Press MENU and the TV menu screen displays.

2Press c/d to select “Connections”, and then press OK.

3Press a/b to select “HDMI setup”, and then press OK.

4Press a/b to select “EXT5” or “EXT6”, and then press OK.

5Press a/b to select the desired item.

6Press c/d to select the desired setting.

HDMI setup	Selectable	Description
items	items
Signal type*	RGB/YCbCr	Select the video signal type
	4:4:4/YCbCr 4:2:2	from the HDMI terminal.
Colour	ITU601/ITU709	Select the internal colour
matrix*		space conversion method
		when an RGB signal is
		input.
Dynamic	Normal/	Select the signal amplitude
range*	Enhanced	range. Usually, select
		“Normal”.
Auto view	Enable/Disable	Set whether or not to use
		Wide mode based on
		signal recognition, including
		an HDMI signal.
Audio	Digital/Analogue	Select “Digital” for audio
select**		signal via the HDMI
		terminal. Select “Analogue”
		for audio signal via the
		AUDIO jack.

NOTE

•Refer to your external equipment operation manual for the signal type.

•Items with * may be greyed out depending on the type of signal input from the external equipment.

•Item marked ** is only available when EXT5 is selected.

18