DTV menu operations
Favourite
Assign services to 4 different favourite groups.
1Press a/b to select the desired service.
2Press 1 on the remote control. A selection box displays.
3Press a/b to register the selected service to any of the 4 favourite groups (None, Fav 1 ...
Fav 4) and then press OK. An icon displays indicating the favourite status.
•Do not press END to exit the screen here if you wish to register the change.
Move To
Use this function to change the position of two selected services
1Press a/b to select the desired service.
2Press 4 on the remote control.
3Enter the number using 0 - 9 numeric buttons, and then press OK. The positions of the selected services are switched.
•Do not press END to exit the screen here if you wish to register the change.
•You cannot enter a service number that is not listed.
4
5
Press OK. | 4 Press OK again, the message “Successfully | |
Now you can easily select your favourite service | updated” displays. The change is now | |
registered. | ||
from the Programme List. (Page 34) | ||
|
NOTE
•You cannot register the same service to two different favourite groups.
001ZDF
002ARD
003SAT. 1
004RTL
| 001 | RTL |
s | 002 | ARD |
| 003 | SAT. 1 |
| 004 | ZDF |
Lock
When the service is locked, you must enter your PIN whenever you tune to the service.
1Press a/b to select the desired service.
2Press 2 on the remote control.
If you have already set the PIN, enter it here. If not, enter the factory preset PIN “1234”.
An icon displays indicating the service is locked.
•Pressing 2 will turn the lock icon on and off. (PIN entry is required when lifting the lock icon.)
•Do not press END to exit the screen here if you wish to register the change.
3Press OK.
NOTE
• See page 20 for setting the PIN.
Skip
Services that are set to skip will not be picked up when pressing P (s/r).
1Press a/b to select the desired service.
2Press 5 on the remote control. An icon displays indicating the service to be skipped.
•Pressing 5 will turn the skip icon on and off.
•Do not press END to exit the screen here if you wish to register the change.
3Press OK.
NOTE
•To view services that are set to be skipped, use 0 - 9 numeric buttons or select from the Programme List.
Move
Sort the order of the selected service by moving the service position.
1
2
Press a/b to select the desired service.
Press 3 on the remote control. An icon displays indicating the service to be moved.
• Pressing 3 will turn the move icon on and off.
3Move the selected service to the desired position using a/b, and then press OK.
•Do not press END to exit the screen here if you wish to register the change.
4Press OK to register the change.
EXAMPLE:
Moving “002 ZDF” ahead of “001 ARD”.
Default order: Press a/b to select the desired service in 001rs002rs003rs004.
Sorted order: Press a/b to select the desired service in 002rs001rs003rs004.
001ARD
002ZDF
003SAT. 1
004RTL
002 ZDF
s 001 ARD
003SAT. 1
004RTL
28