Sharp LC-52LE925UN Connecting a PC, When using analog RGB cable PC Back panel vertical inputs

Connecting to External Equipment

Connecting a PC

Refer to page 59 for a list of PC signals compatible with the TV.

■When using HDMI cable (HDMI 1, 2, 3 or 4):

Back panel vertical inputs

HDMI-certified cable

HDMI OUT

•Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 59.)

•The HDMI terminals only support digital signal.

■When using DVI-HDMI conversion cable (HDMI 1):

Ø3.5 mm stereo minijack cable

AUDIO	DVI-HDMI conversion cable
DVI OUT

Back panel vertical inputs

•When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". (See page 59.)

■When using analog RGB cable (PC IN):

Back panel vertical inputs

Analog RGB cable

(D-sub 15-pin cable or VGA cable)

Ø 3.5 mm stereo minijack cable

RGB AUDIO

•When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.

•When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 59.)

17