Enjoying 3D Image Viewing
Using the 3D Glasses
Turning On/Off the Power
Turn on the power of the 3D Glasses.
•Press the power button for at least 2 seconds.
•The LED light blinks 3 times.
Turn off the power on the 3D Glasses.
•Press the power button for at least 2 seconds.
•The LED light lights for 2 seconds.
•When the battery power is low, the LED light blinks 6 times after the power is turned on.
Switching to 3D and 2D Mode
When viewing 3D images, you can press the power button to switch between 2D and 3D modes. This is useful when several people are viewing 3D images on the same TV with some people wanting to watch in 3D and some people wanting to watch in 2D.
Viewing 3D Images
•The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode.
Receiving a 3D Image Signal That Can Be
Detected Automatically
■Viewing 2D images
When you press the power button twice while viewing 3D images, the LED light blinks 2 times and the 3D images switch to 2D images.
■Viewing 3D images
When you press the power button twice while viewing 2D images, the LED light blinks 3 times and the 2D images switch to 3D images.
Usage Range of the 3D Glasses
The 3D Glasses can be used by receiving an infrared signal sent from the TV.
The 3D Glasses turn off automatically after 3 minutes if no signal is received from the TV.
Operating range:
From directly in front of the infrared transmitter on the TV: approx. 17 ft (5 m)
(within approx 30° horizontally and 20° vertically)
• The infrared emitter lights in 3D mode.
The image signal may contain a 3D identifi cation signal. You can enable the TV to automatically detect the 3D image type by selecting “System Options” > “3D Setup” > “3D Auto Change” on the TV. (See page 45.)
1When “3D Auto Change” is set to “Yes”
•The 3D image type is detected automatically and the appropriate 3D image is displayed.
Changed to 3D mode. Put on 3D glasses and press the power button on the glasses.
If you are in bad physical conditions
or feel uncomfortable watching 3D picture please stop watching TV.
3D
When “3D Auto Change” is set to “No”
•The following message is displayed. Press 3D.
3D picture is detected.
Press the power button on the 3D glasses.
(Need to wear the 3D glasses to watch 3D picture)
•Press c/d to select the "Yes", and then press ENTER.
Yes
No
2Turn on the 3D Glasses and place them on your head.
•Press the power button for at least 2 seconds.
•The LED light blinks 3 times.
3You can now view 3D images.
43