Sharp LC-46PD7X operation manual AV Mode selection, OPC Optical Picture Control setting

Basic adjustment settings (Analogue/Digital)

AV MODE selection

The AV MODE function enables you to select appropriate settings for audio and video to account for the system environment which can vary due to factors like room brightness, type of programme watched or the type of image input from external equipment.

Using AV MODE on the remote control unit

1Press AV MODE.

• Present AV MODE displays.

2Press AV MODE again before the mode displayed on the screen disappears.

• The mode changes as shown below.

When the input source is TV, DTV, INPUT1 or 2 terminals (Example)

OPC (Optical Picture Control) setting

You can set the TV to automatically adjust the screen to suitable backlight brightness according to the lighting conditions.

Using OPC on the remote control unit

AV MODE: STANDARD

AV MODE: DYNAMIC

AV MODE: DYNAMIC (Fixed)

AV MODE: MOVIE

AV MODE: GAME

AV MODE: USER [TV]

Press OPC to switch the OPC function on and off.

Using OPC on the menu screen

1Press MENU and the MENU screen displays.

2Press c/d to select “Picture”.

When the input source is INPUT3, 4 or 5 terminals (Example)

	AV MODE: STANDARD			AV MODE: MOVIE
	AV MODE: DYNAMIC			AV MODE: GAME
	AV MODE: DYNAMIC (Fixed)			AV MODE: PC
				AV MODE: USER [ ]
Selected item			Description
STANDARD		For a highly defi ned image in a normally
		bright room
MOVIE		For a movie
GAME		Lowers image brightness for easier viewing.
PC		For PC. (Available only when inputting an
		HDMI or DVI signal.)
USER		Allows the user to customise settings as
		desired. You can set the mode for each
		input source.
DYNAMIC		Changes the image and sound settings to
(Fixed)		the factory preset values. No adjustments
		are allowed.
DYNAMIC		For a clear-cut image emphasising high
		contrast for sports viewing

NOTE

•You can select a different AV MODE item for each input mode. (For example, select STANDARD for ANALOGUE TV

26input and DYNAMIC for INPUT1.)

3Press a/b to select “OPC”.

4Press c/d to select the desired item, and then press ENTER.

Selected item	Description
Off	The brightness is fi xed at the value set in
	“Backlight” (See page 27).
On	Automatically adjusts
On: Display	Displays the OPC effect on the screen
	while adjusting the brightness of the
	screen.

NOTE

•Make sure no object obstructs the OPC sensor, which could affect its ability to sense surrounding light.