Sharp LC-46PD7X operation manual Installation, Auto Search, Manual Adjust, Auto search starts

Page 37

Basic adjustment settings (Digital)

Installation

The fi rst time the receiver is powered on, “Programme list is empty” will display on the screen. Under the main menu, select “Installation” and enter into the sub- menu.

Auto Search

You can automatically search for and download TV channels.

1Press DTV MENU to display the DTV menu screen.

2Press a/b to select “Setup”, and then press

ENTER.

3Press a/b to select “Installation”, and then press ENTER.

If you have already set the password, enter it here. If not, enter the factory preset password “1234”.

• See page 39 for setting a password.

4Press a/b to select “Auto Search”, and then press ENTER.

5Press c/d to select “Yes”, and then press

ENTER.

6Auto search starts.

• Programme auto search

You do not need to do anything during the auto search.

NOTE

•Once the DTV signal is scanned, the channel number and programme name will be shown on the programme list.

•The indicator operates concurrently with scanning channels and shows the progress made.

Manual Adjust

You can set some channel items manually.

1Repeat steps 1 to 3 in Auto Search.

2Press a/bto select “Manual Adjust”, and then press ENTER.

3Press 0—9or c/d to select a channel number.

• Channel settings apply to channels 2-69.

4Press a/bto select the desired menu item, and make sure the correct frequency is selected.

Channel No : 3

Frequency : 778000KHz

Signal Level : 94%

Quality :

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

100%

SNR :

 

 

 

 

 

 

 

 

25dB

 

 

 

 

 

 

 

Start Scan

5Press a/b to select “Start Scan”, and then press ENTER.

NOTE

•If a signal locks in, “Start Scan” will change to “Get Channel Success”. Then you can press EXIT to leave the installation page and watch a programme or continue scanning for other channels. Anytime you watch a DTV channel and want to know the “Signal Level”, “Quality” or “SNR”, enter into this page.

•If a signal does not lock in, “Start Scan” will show “Timeout Error”. You can scan the signal again, or refer to the “Signal Level” and “Quality” for aligning the direction of the antenna to get the signal.

•Signal Level: The signal power or intensity from the broadcasted frequency.

Quality: The clean level of the signal from the broadcasted frequency.

SNR: The rate of signal and noise to radiated frequency.

35

Page 36 Page 38
Image 37
Page 36 Page 38
Contents LC-46PD7X LC-52PD7X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Preparation Using the remote control unitInserting the batteries Preparation Attaching the standBundling the cables Setting the TVInsert the cable clamp in the hole on the TV as shown TV rear viewRemoving the stand Setting the TV on the wallConnecting to the AC outlet Connecting to an antennaBasic connection Simple operations for watching a TV programmeConnecting a DVD player Connecting a VCR, game console or camcorderWhen using component cable commercially available When using Hdmi cable commercially availableWhen using DVI cable commercially available Connecting a PCTV Front Part namesTV/VIDEO button Part names TV RearWhen using the remote control unit, point it at the TV Remote control unitTurning off the power Turning on the powerWatching TV Simple button operations for changing channelsUsing MPX on the remote control unit Using Flashback a on the remote control unitWatching TV Using Mute e on the remote control unit Changing the volumePress e again within 30 minutes to cancel the mute Mutes the current sound output Press eANALOG/DTV/RADIO buttons When you watch the TV for the first timeAnalogue TV Menu operation buttons Basic adjustment settingsOn-Screen Display Menu items TV/DTV/INPUT1-2 Basic adjustment settingsMenu items HDMI/DVI List of menu items to help you with operationsProgramme setup Auto installationBasic adjustment settings Analogue Auto searchFine tuning Search tuningColour system See Sound system See Labelling channels Colour systemLabelling menu Sound system Broadcasting systemSort Setting the child lockSkipping channels Erase programme menus Basic adjustment settings Analogue Erase ProgrammeOPC Optical Picture Control setting AV Mode selectionBasic adjustment settings Analogue/Digital Adjustment items Picture adjustmentsAdvanced Colour temperature Quick ShootBlack 3D-Y/CFilm Mode Basic adjustment settings Analogue/Digital MonochromeRange of OPC MaxUsing Surround on the remote control unit Audio adjustmentPress Surround to switch the Surround function on and off Using Surround on the menu screenPower Control setting allows you to save energy Power ControlNo Signal Off No Operation OffDTV input mode menu items Basic adjustment settings DigitalSelecting DTV mode List of DTV menu items to help you with operationsProgramme Guide Basic adjustment settings DigitalFavourite Programme List InfoFavourite & Lock Programme ListParental Rate Press a/b to select Favourite & Lock, and then EnterManual Adjust InstallationAuto Search Auto search startsVideo Setup Reset DataQuick Search Press a/b to select Quick Search, and then press EnterUsing Digital Audio Output Time SetupDigital Output Multilingual Update Service only Plate Setup Information Plate SetupInformation Press a/b to select Information, and then press EnterPassword setting for child lock for TV/DTV input mode Useful adjustment settingsSetting a password Resetting the passwordUseful adjustment settings Input Signal PC input mode onlyInput Skip Press Menu to exitFine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyPhase PosInput Label Adjustments are stored separately according to input sourceImage position WSS signal 43 screen Mode Panorama Wide Screen Signalling WSSPicture aspect ratio Press c/d to select On or Off, and then press EnterReset Standby ModeMode menu Wide mode for TV/AV input modeManual Selection Auto SelectionYou can select the screen size Wide mode for PC input modePress Wide or a/b to select a desired item on the menu Normal Cinema Full Dot by DotAudio Only Hdmi SetupDNR Digital Noise Reduction Press a/b to select the desired item, and then press EnterColour system setting Language setting for on-screen displayIdentification Displaying an external equipment image Using external equipmentDisplaying a DVD image Example Input SelectTeletext function Useful featuresDisplaying Subtitle Useful featuresDisplaying Subpages Time displayPress Freeze again to cancel the function Teletext language settingFreezing images Troubleshooting DTV TroubleshootingProblem Possible Solution AppendixRS-232C port specifications Communication procedureAppendix PC Control of the TVCommands PC compatibility chartResolution Horizontal Vertical Response code formatSpecifications Optional accessoriesModel Part name Model numberLC-46PD7X, LC-52PD7X Dimensional drawingsUnit mm Password is Clearing the PasswordMemo Memo Page Printed on post-consumer recycled paper
Top Page Image Contents