Sharp LC-46PD7X Using external equipment, Displaying an external equipment image, Input Select

Page 51

Using external equipment

Displaying an external equipment image

Explanation here is for the setting when connecting DVD player to INPUT1 terminal.

NOTE

•Each time TV/VIDEO is pressed, the input source toggles.

•If the image does not come in clearly, you may need to change the input signal type setting on the “Input Select” menu.

•Refer to your external equipment operation manual for the signal type.

Displaying a DVD image (Example)

1To watch a DVD image, select “INPUT1” using TV/VIDEO on the remote control unit or TV/ VIDEO on the TV.

INPUT SOURCE

TV

DTV

INPUT1

INPUT2

INPUT3

INPUT4

INPUT5

2Select the desired signal type on “Input Select” in the “Option” menu.

For INPUT1 signal

MENU [Option ... Input Select]

Auto

COMPONENT

VIDEO

The setting is stored and can be selected.

Input Select

Selecting input source

Can use for selecting the input source.

Using TV/VIDEO on the remote control unit or on the TV

TV/VIDEO allows you to choose from the available input sources.

1Press TV/VIDEO on the remote control unit or on the TV.

2Press TV/VIDEO on the remote control unit or on the TV to select the input source.

•The image from the selected source automatically displays.

•You can also select the input source by pressing a/b.

Selecting input signal type

For setting the signal type of external equipment.

1Press MENU and the MENU screen displays.

2Press c/d to select “Option”.

3Press a/b to select “Input Select”, and then press ENTER.

4Press a/b to select a signal type you want to set, and then press ENTER.

Input source	Selectable item

INPUT 1	Auto, COMPONENT, VIDEO

INPUT 2	Auto, COMPONENT, VIDEO

INPUT 5	Auto, DIGITAL, ANALOGUE

NOTE

•If no (colour) image displays, try to change the other signal type.

•Check the operation manual of the external equipment for the signal type.

•When the signal type is set to “Auto”, the input terminal where cable is connected is automatically selected.

•When the signal type is set to “Auto” and multiple video signal cables are connected, the signal type is selected in

the following prioritised order:

INPUT 1/INPUT 2: COMPONENTs VIDEO

•When the signal type for “INPUT5” is set to “DIGITAL” or “ANALOGUE”, a “PC” or “AV” signal is automatically detected.

49

Image 51

Contents LC-46PD7X LC-52PD7X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Using the remote control unit PreparationInserting the batteries Preparation Attaching the standTV rear view Setting the TVBundling the cables Insert the cable clamp in the hole on the TV as shownRemoving the stand Setting the TV on the wallSimple operations for watching a TV programme Connecting to an antennaConnecting to the AC outlet Basic connectionWhen using Hdmi cable commercially available Connecting a VCR, game console or camcorderConnecting a DVD player When using component cable commercially availableWhen using DVI cable commercially available Connecting a PCPart names TV FrontTV/VIDEO button Part names TV RearWhen using the remote control unit, point it at the TV Remote control unitSimple button operations for changing channels Turning on the powerTurning off the power Watching TVUsing Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Mutes the current sound output Press e Changing the volumeUsing Mute e on the remote control unit Press e again within 30 minutes to cancel the muteWhen you watch the TV for the ﬁrst time ANALOG/DTV/RADIO buttonsAnalogue TV Basic adjustment settings Menu operation buttonsOn-Screen Display List of menu items to help you with operations Basic adjustment settingsMenu items TV/DTV/INPUT1-2 Menu items HDMI/DVIAuto search Auto installationProgramme setup Basic adjustment settings AnalogueSearch tuning Fine tuningColour system See Sound system See Sound system Broadcasting system Colour systemLabelling channels Labelling menuSetting the child lock SortSkipping channels Erase programme menus Basic adjustment settings Analogue Erase ProgrammeAV Mode selection OPC Optical Picture Control settingBasic adjustment settings Analogue/Digital Adjustment items Picture adjustments3D-Y/C Colour temperature Quick ShootAdvanced BlackMax Basic adjustment settings Analogue/Digital MonochromeFilm Mode Range of OPCUsing Surround on the menu screen Audio adjustmentUsing Surround on the remote control unit Press Surround to switch the Surround function on and offNo Operation Off Power ControlPower Control setting allows you to save energy No Signal OffList of DTV menu items to help you with operations Basic adjustment settings DigitalDTV input mode menu items Selecting DTV modeInfo Basic adjustment settings DigitalProgramme Guide Favourite Programme ListPress a/b to select Favourite & Lock, and then Enter Programme ListFavourite & Lock Parental RateAuto search starts InstallationManual Adjust Auto SearchPress a/b to select Quick Search, and then press Enter Reset DataVideo Setup Quick SearchTime Setup Using Digital Audio OutputDigital Output Multilingual Press a/b to select Information, and then press Enter Plate Setup Information Plate SetupUpdate Service only InformationResetting the password Useful adjustment settingsPassword setting for child lock for TV/DTV input mode Setting a passwordPress Menu to exit Input Signal PC input mode onlyUseful adjustment settings Input SkipPos Auto Sync. adjustment PC input mode onlyFine Sync. adjustment PC input mode only PhaseAdjustments are stored separately according to input source Input LabelImage position Press c/d to select On or Off, and then press Enter Wide Screen Signalling WSSWSS signal 43 screen Mode Panorama Picture aspect ratioReset Standby ModeAuto Selection Wide mode for TV/AV input modeMode menu Manual SelectionNormal Cinema Full Dot by Dot Wide mode for PC input modeYou can select the screen size Press Wide or a/b to select a desired item on the menuPress a/b to select the desired item, and then press Enter Hdmi SetupAudio Only DNR Digital Noise ReductionLanguage setting for on-screen display Colour system settingIdentiﬁcation Input Select Using external equipmentDisplaying an external equipment image Displaying a DVD image ExampleTeletext function Useful featuresTime display Useful featuresDisplaying Subtitle Displaying SubpagesTeletext language setting Press Freeze again to cancel the functionFreezing images Appendix TroubleshootingTroubleshooting DTV Problem Possible SolutionPC Control of the TV Communication procedureRS-232C port speciﬁcations AppendixResponse code format PC compatibility chartCommands Resolution Horizontal VerticalPart name Model number Optional accessoriesSpeciﬁcations ModelDimensional drawings LC-46PD7X, LC-52PD7XUnit mm Password is Clearing the PasswordMemo Memo Page Printed on post-consumer recycled paper