Sharp LC-46PD7X Power Control setting allows you to save energy, No Signal Off

Page 33

Basic adjustment settings (Analogue/Digital)

Power Control

Power Control setting allows you to save energy.

No Signal Off

When set to “Enable”, the power will automatically shut down if no signal inputs for 15 minutes.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Power Control”.

• Power control menu displays.

3Press a/b to select “No Signal Off”, and then press ENTER.

4Press c/d to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

•“Disable” is factory preset value.

•When a TV programme ﬁ nishes, this function may not operate.

No Operation Off

When set to “Enable”, the power will automatically shut down if there is no operation for 3 hours.

1

2

Press MENU and the MENU screen displays.

Press c/d to select “Power Control”.

• Power control menu displays.

3Press a/b to select “No Operation Off”, and then press ENTER.

4Press c/d to select “Enable”, and then press

ENTER.

•Five minutes before the power shuts down, remaining time displays every minute.

NOTE

• “Disable” is factory preset value.

31

Image 33

Contents LC-46PD7X LC-52PD7X Page Dear Sharp customer ContentsTrademarks ContentsPrecautions when transporting the TV Important Safety PrecautionsSupplied accessories Using the remote control unit PreparationInserting the batteries Preparation Attaching the standBundling the cables Setting the TVInsert the cable clamp in the hole on the TV as shown TV rear viewRemoving the stand Setting the TV on the wallConnecting to the AC outlet Connecting to an antennaBasic connection Simple operations for watching a TV programmeConnecting a DVD player Connecting a VCR, game console or camcorderWhen using component cable commercially available When using Hdmi cable commercially availableWhen using DVI cable commercially available Connecting a PCPart names TV FrontTV/VIDEO button Part names TV RearWhen using the remote control unit, point it at the TV Remote control unitTurning off the power Turning on the powerWatching TV Simple button operations for changing channelsUsing Flashback a on the remote control unit Using MPX on the remote control unitWatching TV Using Mute e on the remote control unit Changing the volumePress e again within 30 minutes to cancel the mute Mutes the current sound output Press eWhen you watch the TV for the ﬁrst time ANALOG/DTV/RADIO buttonsAnalogue TV Basic adjustment settings Menu operation buttonsOn-Screen Display Menu items TV/DTV/INPUT1-2 Basic adjustment settingsMenu items HDMI/DVI List of menu items to help you with operationsProgramme setup Auto installationBasic adjustment settings Analogue Auto searchSearch tuning Fine tuningColour system See Sound system See Labelling channels Colour systemLabelling menu Sound system Broadcasting systemSetting the child lock SortSkipping channels Erase programme menus Basic adjustment settings Analogue Erase ProgrammeAV Mode selection OPC Optical Picture Control settingBasic adjustment settings Analogue/Digital Adjustment items Picture adjustmentsAdvanced Colour temperature Quick ShootBlack 3D-Y/CFilm Mode Basic adjustment settings Analogue/Digital MonochromeRange of OPC MaxUsing Surround on the remote control unit Audio adjustmentPress Surround to switch the Surround function on and off Using Surround on the menu screenPower Control setting allows you to save energy Power ControlNo Signal Off No Operation OffDTV input mode menu items Basic adjustment settings DigitalSelecting DTV mode List of DTV menu items to help you with operationsProgramme Guide Basic adjustment settings DigitalFavourite Programme List InfoFavourite & Lock Programme ListParental Rate Press a/b to select Favourite & Lock, and then EnterManual Adjust InstallationAuto Search Auto search startsVideo Setup Reset DataQuick Search Press a/b to select Quick Search, and then press EnterTime Setup Using Digital Audio OutputDigital Output Multilingual Update Service only Plate Setup Information Plate SetupInformation Press a/b to select Information, and then press EnterPassword setting for child lock for TV/DTV input mode Useful adjustment settingsSetting a password Resetting the passwordUseful adjustment settings Input Signal PC input mode onlyInput Skip Press Menu to exitFine Sync. adjustment PC input mode only Auto Sync. adjustment PC input mode onlyPhase PosAdjustments are stored separately according to input source Input LabelImage position WSS signal 43 screen Mode Panorama Wide Screen Signalling WSSPicture aspect ratio Press c/d to select On or Off, and then press EnterReset Standby ModeMode menu Wide mode for TV/AV input modeManual Selection Auto SelectionYou can select the screen size Wide mode for PC input modePress Wide or a/b to select a desired item on the menu Normal Cinema Full Dot by DotAudio Only Hdmi SetupDNR Digital Noise Reduction Press a/b to select the desired item, and then press EnterLanguage setting for on-screen display Colour system settingIdentiﬁcation Displaying an external equipment image Using external equipmentDisplaying a DVD image Example Input SelectTeletext function Useful featuresDisplaying Subtitle Useful featuresDisplaying Subpages Time displayTeletext language setting Press Freeze again to cancel the functionFreezing images Troubleshooting DTV TroubleshootingProblem Possible Solution AppendixRS-232C port speciﬁcations Communication procedureAppendix PC Control of the TVCommands PC compatibility chartResolution Horizontal Vertical Response code formatSpeciﬁcations Optional accessoriesModel Part name Model numberDimensional drawings LC-46PD7X, LC-52PD7XUnit mm Password is Clearing the PasswordMemo Memo Page Printed on post-consumer recycled paper