Sharp LC-32E67U operation manual Audio Menu, Surround, Bass Enhancer

On-Screen Display Menu

Film Mode (3:2 pull-down)

Automatically detects a fi lm-based source (originally encoded at 24 frames/second), analyzes it then recreates each still fi lm frame for high-defi nition picture quality.

On: Detects, analyzes, converts fi lm source.

Off: Normal viewing mode.

Audio Menu

You can adjust the sound quality to your preference with the following settings.

Example

Audio

•"Film Mode" is not selectable when channel display shows an input resolution of 480p, 720p, or 1080p.

Digital Noise Reduction

Produces a clearer video image.

Off: No adjustment

High/Middle/Low: Select a desired level for viewing a clearer video image.

3D-Y/C

Provides high quality images with minimal dot crawl and cross color noise.

Slow: For still images.

Standard: Normal adjustment.

Fast: For moving images.

Treble	[	0]	a15
Bass	[	0]	a15
Balance	[	0]	L
Surround

Bass Enhancer

Reset

b15

b15

R

Off: For Game Mode.

•3D-Y/C is available for input signal from Composite Video and analog broadcasts (air and cable).

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

Range of OPC

The brightness level range of the OPC sensor's automatic adjustments can be set according to your preferences. The adjustment range of the OPC sensor can be set to a maximum of +16 and a minimum of –16.

Max.: –15 through +16

Min.: –16 through +15

•The maximum setting cannot be set to a smaller number than the minimum setting.

•The minimum setting cannot be set to a bigger number than the maximum setting.

•Depending on the brightness of the surrounding light, the OPC sensor might not operate if the adjustment range is small.

1Press MENU to display the MENU screen, and then press c/d to select "Audio".

2Press a/b to select a specifi c adjustment item.

•Select "Surround" or "Bass Enhancer" and then press ENTER to set each item.

3Press a/b (or c/d) to select the desired setting, and then press ENTER.

4Press MENU to exit.

Selected item	cbutton	dbutton
Treble	For weaker treble	For stronger treble
Bass	For weaker bass	For stronger bass
Balance	Decrease audio from	Decrease audio from
	the right speaker	the left speaker

•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)

•For resetting all Audio adjustment items to the factory preset values, press a/b to select "Reset", press ENTER, press a/b to select "Yes", and then press ENTER.

Surround

Surround function allows you to enjoy realistic "live" sound.

On: Surround function is on.

Off: Normal sound.

•You can choose Surround by pressing SURROUND on the remote control unit. (See page 15.)

•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)

•For some discs, setup may be required on your DVD player. In this case, please refer to the operation manual of your DVD player.

Bass Enhancer

This function allows you to enjoy bass-enhanced sound.

On: Bass Enhancer function is on.

Off: Normal sound.

•Audio menu is grayed out when Output Select is set to "Variable". (See page 29.)

22