Sharp LC-32E67U operation manual Power Control Menu, Setup Menu

Page 25

On-Screen Display Menu

Power Control Menu

Power control setting allows you to save energy.

Example

Power Control

Power Saving

No Signal Off

No Operation Off

1Press MENU to display the MENU screen, and then press c/d to select "Power Control".

2Press a/b to select a specifi c adjustment item, and then press ENTER.

3Press a/b (or c/d) to select the desired setting, and then press ENTER.

4Press MENU to exit.

Power Saving

This function allows you to automatically reduce the backlight brightness in order to decrease the power consumption and increase the backlight lifespan.

Standard: Reduces the backlight brightness to 80%.

When set to “Standard”, “” appears on the screen. Advanced: Reduces the backlight brightness to 70%.

When set to “Advanced”, “” appears on the screen. Off: The backlight brightness is the same value of your

settings in the selected AV MODE.

“Power Saving” does not function when you set “AV MODE” to “DYNAMIC (Fixed)”.

When “OPC” is set to “On(Display)” or “On” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “OPC” in the Picture menu screen.

When “OPC” is set to “Off” while “Power Saving” is set to “Standard” or “Advanced”, the Power Saving leaf icon appears to the left of “Backlight” in the Picture menu screen.

You can select Power Saving by pressing POWER SAVING on the remote control unit. (See page 17.)

No Signal Off

When set to "Enable", the power will automatically shut down if there is no signal for 15 minutes.

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.

"Disable" is the factory preset value.

When a TV program fi nishes, this function may not operate.

No Operation Off

You can set the time length the TV takes to automatically shut the power down when there is no operation.

30min/3Hour/Disable

When it is 5 minutes before the power shuts down, the remaining time will start to keep appearing every minute.

"Disable" is the factory preset value.

Setup Menu

Example

Setup

EZ Setup

CH Setup

Input Skip

Input Label

Parental CTRL

Position

PC Setup

PC Audio Select

HDMI Auto View

Audio Setup

Language

Reset

1Press MENU to display the MENU screen, and then press c/d to select "Setup".

2Press a/b to select a specifi c adjustment item, and then press ENTER.

When you select "EZ Setup", "CH Setup", "Parental CTRL" or "Reset", you can enter the 4-digit secret number here. See page 26 for setting a secret number.

3Press a/b (or c/d) to select the desired setting, and then press ENTER.

4Press MENU to exit.

EZ Setup

You can run EZ Setup again, even after setting up the preset channels.

Language: Select from among 3 languages (English, French and Spanish).

TV Location: Select "Home" or "Store" for the location where you plan to install the TV. This product qualifi es for ENERGY STAR V3.0 in Home mode default setting.

Home: “Power Saving” is set to "Off", and AV MODE is set to "STANDARD".

Store: “Power Saving” is set to "Off" and AV MODE is set to "DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)" regardless of whether Picture Reset is "On" or "Off". If you select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if there is no operation for 30 minutes. When "Off" is selected, AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When “On” is selected, after all the settings are completed, the Feature Demo screen is displayed if there is no operation for several minutes.

ENERGY STAR qualifi cation is based on AV MODE "STANDARD".

Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for all channels viewable in the set area.

See "Initial Setup" on page 14 for setting each item.

If no channel is found, confi rm the type of connection made with your TV and try EZ Setup again.

23

Image 25
Contents LC-32E67U Page LC-32E67U Declaration of Conformity TrademarksDear Sharp Customer Additional Safety InformationPrecautions when transporting the TV Tune Into Safety IssueThis Manufacturer Cares Attaching the Stand Supplied AccessoriesPower indicator on the front of the television lights Green Using the Remote Control UnitConnecting Antenna Cable Installing Batteries in the Remote Control UnitClose the battery cover PreparationContents TV Front Part NamesTV Rear/Side Input buttonWhen using the remote control unit, point it at the TV Remote Control UnitConnecting Audiovisual Equipment Connecting to External EquipmentWhen using composite cable Input When using component cable Input 1 orConnecting Hdmi Equipment Using Digital Audio OutputConnecting a PC When connecting to a PC with an analog RGB terminal InputInitial Setup Turning On/Off the PowerWatching TV Sleep Timer Changing VolumeDirect Button Operation Changing ChannelsDigital broadcasting audio mode MTS/SAP stereo modeClosed Captions and Digital Closed Captions Press Power SavingFor PC input mode Press View ModeYou can select the screen size For 43 programsFor HDMI/PC-IN Mode For TV/INPUT 1/2/3 ModeOn-Screen Display Menu Menu ItemsUsing the control panel of the main unit Using the remote controlOn-Screen Display Menu Operation Menu Operation ButtonsAdvanced Picture Setting OPC SettingPicture Menu Surround Audio MenuBass Enhancer Setup Menu Power Control MenuPC Setup CH SetupInput Skip Input LabelReset Audio SetupPosition PC Audio SelectParental Ctrl Parental Control Setting Rating Mpaa Voluntary movie rating systemCanadian English Ratings How to temporarily release the V-CHIP BlockCanadian French Ratings Reactivating the temporarily released V-CHIP BlockOption Menu Software Update Favorite CH Favorite Channel SettingDemo Mode Operation Lock OutPress Enter to start updating During the data checking, Checking blinksAfter the screen shown below is displayed, press EnterOther Viewing Options Presetting Remote Control FunctionOther Viewing Options Manufacturer codes Controlling Hdmi Equipment Using Aquos Link Using Aquos LinkAuto Power On Aquos Link SetupOne Touch Recording Selecting RecorderAquos Link Menu Timer RecordingOne Touch Playback Press d to start playing back a titleManually Changing Aquos Audio Speaker System’s Sound Mode Playback of Titles Using Aquos LinkSelecting Media Type for Aquos Link Compatible Recorder Hdmi Device SelectionAppendix Setting the TV on the WallRemoving the Stand Troubleshooting-Digital Broadcasting TroubleshootingError message about reception of broadcast Problem Possible SolutionRS-232C Port Specifications Specifications Optional AccessoryModel LC-32E67U Part name Model numberInformation on the Software License for This Product PC Compatibility ChartClearing the Secret Number Limited Warranty Calling for ServiceDimensional Drawings Sharp Electronics Corporation