Sharp LC-32D62U Simple button operations for changing channels, Method, Press 5sENT

Watching TV

Simple button operations for changing channels

You can change channels in several ways.

Method 1

Using CH r/son the remote control unit or on the TV.

Method 2

1 Press FLASHBACK to switch to the previously tuned channel.

2 Press FLASHBACK again to switch back to the currently tuned channel.

NOTE

•FLASHBACK will not work if no channel has been changed after the TV is turned on.

Method 3

Using remote control buttons 0-9, • (DOT) to select channels for VHF/UHF/CATV/DIGITAL.

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5sENT

Air	Air	ANALOG
5		5

NOTE

•When selecting a 1-digit channel number, it is not necessary to press 0 before the number.

•When you enter 0-9only, channel selection will be made if there is no operation within a few seconds.

To select a 3-digit channel number (e. g., Channel 115):

Press 1s1s5sENT
Cable	Cable	Cable ANALOG
1	11	115
To select a 4-digit channel number
(e. g., Channel 22.1):
Press 2 s2s • (DOT) s1sENT
Air	Air	Air	Air	Air	DIGITAL
2	22	22.	22.1		22.1

NOTE

•When you enter 0–9only, channel selection will be made if there is no operation within a few seconds.

•If you push “0” by itself, nothing will happen.

•Complete the above steps within a few seconds.

•When you enter 0–9and • (DOT), channel selection will be made if there is no operation within a few seconds.

18