Sharp LC-32D62U operation manual Input Label Sleep Timer, Useful adjustment settings

Useful adjustment settings

Input Label Sleep Timer

Lets you set the input terminal displayed when using the INPUT SOURCE menu or channel display.

Allows you to set a time when the TV automatically switches to standby.

1	Press INPUT to select the desired input
	source.
2	Press MENU to display the MENU screen, and
	then press c/d to select “Setup”.
3	Press a/b to select “Input Label”, and then
	press ENTER.
4	Press a/b/c/d to select the new name for
	the input mode, and then press ENTER.
		Example
		INPUT SOURCE
		TV
		DVD
		INPUT2
		INPUT3
		INPUT4
		INPUT5
5	Press MENU to exit.

NOTE

• You cannot change labels if the INPUT SOURCE is TV.

1	Press SLEEP.
	• The remaining time displays when the sleep timer
	has been set.
	Sleep Timer: Remaining	30

2	Each time you press SLEEP, the remaining
	time switches as shown below.

•When set, the time automatically starts counting down.

•If you want to adjust the sleep timer, you can press SLEEP twice then change the time setting.

•Five minutes before the time expires, the remaining time displays every minute.

Off		30		60
	120		90

NOTE

•Select “Off” by pressing SLEEP to cancel the sleep timer.

•The TV will enter the standby when the remaining time reaches zero.

•When the sleep timer is set, its indicator on the TV lights red.

33