Sharp LC-32D62U Using external equipment, Displaying an external equipment image, Input Select

Using external equipment

Displaying an external equipment image

To view external source images, select the input source from INPUT on the remote control unit or on the TV.

1	Press INPUT.
	•	A list of selectable sources appears.
			INPUT SOURCE
			TV
			INPUT1
			INPUT2
			INPUT3
			INPUT4
			INPUT5
2	Press INPUT again to select the input source.
	•	An image from the selected source automatically
		displays.
	•	Each time INPUT is pressed, the input source
		toggles.
	•	You can also select the input source by pressing
		a/b.
	•	If the corresponding input is not plugged in, you
		cannot change the input. Be sure to connect the
		equipment beforehand.

NOTE

• See pages 13 to 15 for external equipment connection.

Input Select

If the image does not come in clearly from the external equipment connected to INPUT 1 you may need to change the input signal type setting on the “Input Select” menu.

Selecting input signal type (INPUT 1)

1	Press MENU to display the MENU screen, and
	then press c/d to select “Option”.
2	Press a/b to select “Input Select”, and then
	press ENTER.
		Option
		Audio Only
		Digital Noise Reduction	[Off]
		Input Select	[Auto]
		Output Select	[Fixed]

3	Press a/b to select the signal type you want
	to set, and then press ENTER.
	• If the selected signal type is incorrect, images are

not displayed or displayed without any color.

Auto

COMPONENT

VIDEO

4	Press MENU to exit.
	• The setting is stored and can be selected on the
	“INPUT SOURCE” menu.

NOTE

•Refer to your external equipment operation manual for the signal type.

•If you set INPUT 1 to Auto, the TV will automatically select the input signal.

•Check the operation manual of the external equipment for the signal type.

•Setting INPUT 1 signal selection to “Auto” when other equipment is connected will result in the following connection priority.

INPUT 1:

1 COMPONENT VIDEO

2VIDEO

30