Sharp LC-32D62U Other viewing options, Freezing images, Presetting remote control function

Other viewing options

Freezing images

Allows you to capture and freeze a moving image that you are watching.

1	Press FREEZE.
	• A moving image is captured.
2	Press FREEZE again to cancel the function.

NOTE

•When this function is not available, “No displaying still image available.” will display.

•The still image automatically goes out after 30 minutes.

•If you are using the freeze function and a broadcast activates the V-CHIP BLOCK, the freeze function will be cancelled and a V-CHIP BLOCK message will appear.

Presetting remote control function

You can operate the connected AV products (AV Receiver, Cable Box, SAT tuner, DTV, VCR, DVD, LD) using the presetting manufacturer function of your remote control unit.

Presetting manufacturer codes

1	Press FUNCTION until the LED for your
	device lights up.
2	After the LED for your device lights up, press
	FUNCTION and DISPLAY at the same time
	to enter the code registration mode. The LED
	will blink.
3	Press 0–9to enter the manufacturer code. (See
	page 47.)
	• Preset mode is fi nished once the LED no longer
	lights up.
4	After registering the code, the LED will stop
	blinking then turn off after one second. (If you
	perform an incorrect operation, the LED will
	blink quickly then turn off.)

46