Sharp LE914 Special case attenuator, „Menu Setup Settings Channel settings Antenna setup digital

4. Special case: attenuator

In some rare cases it may happen that during the reception of HD channel for a short time small squares appear on the screen or the sound stalls.

Often such effects are caused by the fact that the level of the satellite antenna is too high.

First of all check whether the device has the latest software.

If necessary download software updates from the following website:

http://www.sharp.de/cps/rde/xchg/de/hs.xsl/- /html/service_downloads.htm.

If the above-mentioned error still appears after updating software, it is recommended to to reduce the level of the satellite antenna with the attenuator.

In order to set the actuator correctly, you can use the gauge of reception field strength and quality in the device menu. Switch the tv on in the satellite reception mode and choose a free HD channel and later choose the following options:

„Menu > Setup > Settings > Channel settings > Antenna setup digital"

Possibly you will be asked to enter PIN-code. Enter the 4-digit PIN number. Now choose „Satellite set-up“the following image will appear.

Page - 19 -