Sharp LE820, LE824, LE914, LE925, LE822, LE814 manual

Page 5

After confirmation you will see the following image:

Don't change anuthing and confirm it with the „OK“ button on the remote control.

Now you will see the following:

Choose the preferred satellite and confirm your choice with the „OK “-button on the remote control (in this example Astra1).

You will now see the following image:

Page - 5 -

Image 5
Contents Instructions for Installation of Satellite Channels Remedy When the device has already been fully installedFirst installation Page Page Control Page Page Page Page Sort channels manually Page Page Page Page Page Receive signal from special satellites Page Special case attenuator „Menu Setup Settings Channel settings Antenna setup digital7777 3535 Frequently asked questions Highband 22kHz signal 22kHz Switchbox Switch for two satellitesToneburst switchbox switch for two satellites Definition of terms concerning satellite receptionCommunity installation single cable system MultiswitchRepetition rate in DiSEqC operation Astra 1 / Astra 2 / AstraLNB low-noise block converter Symbol rateLNB Intermediate frequency Transponder
Related manuals
Manual 13 pages 5.6 Kb