Sharp LE822, LE824, LE914, LE925, LE814, LE820 manual

Page 9

After pressing the „OK“ button you will see the following:

Don't change anything and confirm "Yes" with the „OK“ button on the remote control.

Now you will see the following:

The device has started automatic search for tv stations.

The installation of satellite channels may, according to chosen settings or the chosen system configuration take more or less time.

After the end of the automatic search the following image will appear:

Page - 9 -

Image 9
Contents Instructions for Installation of Satellite Channels Remedy When the device has already been fully installedFirst installation Page Page Control Page Page Page Page Sort channels manually Page Page Page Page Page Receive signal from special satellites Page Special case attenuator „Menu Setup Settings Channel settings Antenna setup digital7777 3535 Frequently asked questions Highband 22kHz signal 22kHz Switchbox Switch for two satellitesToneburst switchbox switch for two satellites Definition of terms concerning satellite receptionCommunity installation single cable system MultiswitchRepetition rate in DiSEqC operation Astra 1 / Astra 2 / AstraLNB low-noise block converter Symbol rateLNB Intermediate frequency Transponder
Related manuals
Manual 13 pages 5.6 Kb