Recording ONE Program While Viewing Another

RECORDING ONE PROGRAM WHILE VIEWING ANOTHER

You can record one program while viewing another. To start recording, follow steps [ 1] to [4] under "VIEWING AND RECORDING THE SAME PROGRAM" on page 18.

TO MONITOR THE PROGRESS OF

If you set the TV channel to

3 or 4 channel, press TV/VCR button so that

"VCR" disappears from the13:DI3:D c. 3? display.

•If you connect VCR to TV using AV cord, set your TV to the TV mode using TV/VCR button of your TV.

Set the TV to the channel you want to watch (leave the VCR tuned to the channel you want to record).

YOUR RECORDING,		1
		1
If you set the TV channel to	o	17:l]]: 1"7 o:°"]3?
If you set the TV channel to

3 or 4 channel, press

TV/VCR button so that "VCR" appears on the display.

Turn on the TV and set the TV channel to the same

video output channel located on the back of the VCR. (CH 3 or 4)

•If you connect VCR to TV using AV cord, set your

TV to the VCR mode using TV/VCR button of your TV.

AUTOMATIC TIMER RECORDING

You may set the VCR to start and end a recording while you are away. You can set seven events to record on specific days, daily or weekly within a ! year period.

•VCR Power must be on.

•Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4)

•Press the TV/VCR button so that "VCR" appears on the display.

•Clock must be set to the correct time and date before setting the timer.

•You must use remote control for this procedure.

In the example below, the timer is being set to record:
DATE	Saturday 6th May, 1995	CHANNEL	CH61
SETTING TIME	from 7:30AM to 8:50AM	TAPE SPEED	LP

Insert a cassette tape with the erase-protection tab, if necessary, rewind or fast forward the tape to the point at which you want to begin recording.

number with number but-	PnOGP_NUM_Gi ":;
number with number but-	Io i!tsEEo
	CHANNEL		-2"	":
Select your desired program	START	TiME	- -	: ....
	END	TIME	--	: ....

tons.

Press MENU button on the

menu appears on the TV screenremote. control. The main

Select item i(TIMER PRO- GRAMMING) with number buttons.

[ _.o

3,N,TLtL tZE

[ _ ve.T'E".O AM..,.GSET_p

TAPE SPEEO

DATE

CHANNEL

The program number 8 is used for setting Quick Set Program only. You cannot select number 8 in the

procedure of Automatic Timer Recording.

Press SELECT button on the
remote control.	.... 3	.:WEEKLy
	iiii_iii!!lllii! DALLY		ii][ii]i]][[[ii
[	PROGFI_M	NU_ER	;. ]
	J	ilii%'

-19-

"k**,k _" 5CI6