Sears 934.5512559 Viewing and Recording the Same Program, To Delete Scenes During Recording

VIEWING AND RECORDING THE SAME

PROGRAM

•VCR Power must be on.

•Turn on the TV and set the TV channel to the same video output channel located on the back of the VCR. (CH 3 or 4)

•Press the TV/VCR button so that "VCR" appears on the display.

E:3

Insert a cassette tape with the erase-protection tab, if necessary, rewind or fast forward the tape to the point at which you want to begin

recording.

Counter mode appears at counter 0:00:00 on the dis-

o:oo:oo

play.

TO DELETE SCENES DURING RECORDING

While VCR remains in record	I _-_:_'"
mode, press PAUSE button.

Note: If you do not press PAUSE button again within five minutes, VCR will automatically return to Stop

mode. You may review the time remaining with ,,1,, marks on the display. Each 'lr'mark shows one minute.

Select the channel to be re-

corded by pressing the num- ber buttons on the remote control or the CHANNEL • or • button.

Press SPEED button on the VCR to select the desired tape speed (SP-LP-SLP).

Press REC button.

The red "O" indicator lights on the display.

CH 32]

ISP

IREC sp

	r
Press PAUSE or REC button	_Ec
to resume recording.	Lsp

EDIT SEARCH

To edit an unwanted segment from the already recorded portion of tape while VCR remains in record mode.

While VCR remains in record mode, press PAUSE button.

Press and hold REWIND button until you have reached the beginning of the unwanted segment. (If you rewind past the beginning of the unwanted segment, press and hold F.FWD button until you have reached it.)

Press STOP button when re- cording is completed.

I STOP

Note: If you do not press PAUSE button again within five minutes, VCR will automatically return to Stop mode.

D[3

Press PAUSE or REC button to resume recording.

-18- EN

*****5CI6